DBH 8295/85 radial shaft seal — 22 x 32 x 4.5

DBH 8295/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8295/85 and any equivalents.

The DBH 8295/85 is a radial shaft seal that keeps lubricant in and contaminants out of rotating equipment. It fits a 22 mm shaft, a 32 mm housing bore, and has a 4.50 mm overall height. The Lx design features a single sealing lip with a metal case, making it suitable for lubricated rotating shafts. MR Industrial Accessories supplies this brand and can help you confirm the right seal for your application.

This seal is identified by the designation 8295/85 and belongs to the DBH line of radial shaft seals. Its dimensions are: shaft 22 mm, housing 32 mm, width 4.50 mm. The Lx configuration means a single lip and a metal outer case. The lip rides against the shaft while the case presses into the housing, forming both a dynamic seal at the lip and a static seal at the bore.

You will find a 22 x 32 x 4.50 mm seal in small gearboxes, centrifugal pumps, low-power electric motors, spindles, and belt or chain drives. In these assemblies it retains oil or grease and blocks dust, water, and particles from reaching bearings and gears. Keeping the lubricant clean and contained supports the service life of the equipment.

Proper installation matters. Check that the shaft surface is hard enough and has the correct roughness, with no burrs or scratches that could cut the lip. Lubricate the lip before sliding it over the shaft. Use a press or installation tool that applies force to the metal case, never to the lip. The 4.50 mm height needs a housing deep enough for the seal to sit flush or slightly recessed.

To quote a replacement, send the part number 8295/85 or the shaft and housing dimensions. We can look for alternatives within the same DBH brand or among other brands we carry, matching tolerances and sealing design. We can also advise if your application calls for a spring-loaded lip or a specific material.

Request a quote by sending the part number 8295/85 via WhatsApp or email. Our team replies promptly and can also assist with other seals, bearings, housings, or power transmission parts you need.