DBH 8260 radial shaft seal — 9.5 x 16 x 4

DBH 8260 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8260 and any equivalents.

The DBH 8260 is a radial shaft seal built for a 9.50 mm shaft, a 16.00 mm housing bore and a 4.00 mm overall width. Its job is to hold lubricant in place while keeping dust, particles and moisture out of the assembly. This makes it a practical choice for compact equipment running at low to medium speeds.

In the DBH line, the 8260 code stands for an Ls-type seal. The three figures that matter when you read it are shaft 9.50 mm, housing 16.00 mm and width 4.00 mm. A sealing lip, normally an elastomer, rides against the rotating shaft, and the outer diameter presses into the housing bore to close the gap. It is a replacement part for assemblies that need a small, effective seal.

Typical installations include small electric motors, pumps, gearboxes, fans, machine tools and power transmission equipment. You will also find seals like this on mixer and agitator shafts and in lubrication systems, where the goal is to keep oil or grease contained and protect the bearings. The narrow profile suits tight spaces.

When choosing a seal, match all three dimensions to the shaft and housing on your equipment. The Ls designation tells you the lip and material configuration, which has to suit the fluid being sealed and the temperature in service. At installation, coat the lip with lubricant, keep burrs away from it and check that the shaft surface is not badly worn.

If you need a replacement or an equivalent, send us the code 8260 or the dimensions 9.50 x 16.00 x 4.00 mm. We can point you to alternatives from DBH or from other brands we supply, as long as the dimensions and design stay the same.

To request a quote or ask about other sizes, message us on WhatsApp with the code 8260. We help you identify the correct seal from your shaft and housing measurements.