DBH 8217Pol radial shaft seal — 76 x 93 x 10

DBH 8217Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8217Pol and any equivalents.

When a rotating shaft passes through a fixed housing, the DBH 8217Pol seal keeps the lubricant where it belongs and keeps dust, water and debris out. Its three key measurements are a 76 mm shaft, a 93 mm bore and a 10 mm width, which puts it in the range of medium-sized pumps and transmission units. MR Industrial Accessories supplies this line and can help you match the seal to your application.

Reading the code is the fastest way to confirm what you have. The 8217Pol number identifies the item within the DBH range, and the Lx-R designation describes how the lip and body are put together: the primary lip faces the lubricant side and works against the rotating shaft. The three figures that matter for fit are the shaft at 76 mm, the housing bore at 93 mm and the overall width at 10 mm. Write those down from the old part before you order.

Seals in this size range turn up in gear reducers, centrifugal pumps, electric motors, conveyor rollers and other power transmission assemblies. They also show up on road and agricultural equipment and on process lines where a shaft spins inside a housing under permanent lubrication. Two jobs get done at once: oil or grease stays inside, and outside contamination never reaches the bearings or bushings.

Installation decides how long the seal lasts. Inspect the shaft and bore first, looking for burrs, grooves or heavy wear, and confirm the surface finish suits a lip seal. Press the seal in squarely with a proper driver rather than a hammer, and keep the lip away from sharp edges. Coat the lip with the same oil or grease used in the application before you seat it. If the shaft shows a worn track, an offset lip version may be the better choice.

For a cross-reference, send the 8217Pol code together with the shaft, bore and width measurements, plus a photo or the old sample. That is usually enough to locate a match inside the DBH range or among the other brands we carry, as long as the mounting dimensions and the service conditions line up. We can also tell you whether the original seal uses a special lip configuration.

MR Industrial Accessories supplies the DBH brand. If you are unsure about the application, the lip compound or how it behaves with your lubricant, message us on WhatsApp and we will point you to the right part.