DBH 8214Sil radial shaft seal — 48 x 70 x 12
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8214Sil belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8214Sil and any equivalents.
The DBH 8214Sil is a radial shaft seal designed to retain lubricants and block contaminants in rotating shaft applications. With a shaft diameter of 48 mm, housing bore of 70 mm, and width of 12 mm, it is a common replacement in gearboxes, pumps, and electric motors. MR Industrial Accessories LLC supplies this seal for maintenance and repair operations across the US, Canada, Mexico, and South America.
This seal belongs to the DBH line and carries the part number 8214Sil. Its nominal dimensions are: shaft 48.00 mm, housing 70.00 mm, width 12.00 mm. The Lx-R H design features a sealing lip and a reinforced body, suitable for continuous rotation where oil retention and exclusion of dust or water are required. The 8214Sil code simplifies identification and cross-referencing with equivalent parts.
Typical uses include gearboxes, centrifugal pumps, electric motors, transmission shafts, and process equipment. The seal keeps lubricant inside the assembly and prevents particles, moisture, or debris from reaching bearings and gears. It is a preventive maintenance item that should be checked when leaks or unusual noise appear.
For installation, ensure the shaft and housing bore are clean and free of burrs. Apply a thin film of the equipment's lubricant to the seal lip, then press the seal squarely into the housing using a tool that contacts only the outer diameter. Avoid pressing on the lip. If the shaft surface is worn, a wear sleeve may be needed. Selection depends on operating speed, temperature, and lubricant type.
To request a quote or find an equivalent, send the part number 8214Sil along with the shaft, housing, and width measurements, plus a photo if available. Our team can suggest alternatives within the same series or from other brands we supply. We can also advise if a slightly different dimension might work, always confirming against manufacturer data.
Contact MR Industrial Accessories LLC via WhatsApp or email with the part number 8214Sil. We respond promptly with purchasing options and technical guidance.
Dimensions
- Shaft (d)
- 48mm
- Housing bore (D)
- 70mm
- Height (h)
- 12.00mm
- Design
- Lx-R H
Frequently asked questions
- What applications is the DBH 8214Sil oil seal used for?
- It is used in rotating shaft equipment that requires lubricant retention and contaminant exclusion, such as gearboxes, pumps, electric motors, and transmission shafts. Suitability depends on speed, temperature, and lubricant type. Contact us with your equipment details for confirmation.
- How do I request a quote or find an equivalent for the 8214Sil?
- Send the part number 8214Sil via WhatsApp or email, along with the shaft, housing, and width measurements and a photo if possible. We will search for alternatives within the same series or from other brands we supply and reply promptly.
- What are the dimensions of the DBH 8214Sil oil seal?
- The seal has a shaft diameter of 48.00 mm, a housing bore of 70.00 mm, and a width of 12.00 mm. These nominal dimensions are indicated in the part number and should be verified against the original seal before replacement.