DBH 8182 radial shaft seal — 24 x 36 x 5.5/7

DBH 8182 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8182 and any equivalents.

A lip seal that sits on the shaft and blocks the path of oil or grease in crankcases, gearboxes and pumps: that is the job of the DBH 8182 radial shaft seal. Design A 058 pairs a sealing lip with a metal body that is pressed into the housing. The size range makes it a common replacement item on equipment that runs small-section shafts. MR Industrial Accessories LLC supplies this brand as part of its seals line.

The part carries the DBH brand, code 8182 and design A 058. Reading the size callout: shaft 24 mm, housing 36 mm, height 5.50/7.00 mm. The two height figures tell you the lip stands proud of the case, a layout often chosen to absorb mounting tolerances or to keep better contact along the shaft. A 058 describes how the lip and the metal body are shaped, so it is the reference to confirm against the manufacturer's data if anything looks unclear.

Seals in this size class turn up in small electric motors, centrifugal pumps, worm gear reducers, compressors and machine tools, as well as on drive shafts of industrial laundry equipment, agitators and mixers. The duty never changes: hold the lubricant in and keep dust, water and particles out. Once the shaft surface is scored or worn, the lip can no longer close the gap and leakage starts.

Before ordering, measure the shaft and the housing bore with a caliper. Height matters here: 5.50/7.00 mm will not seat in a shallow housing, while in a deeper one the seal may sit loose. Check the shaft as well, since it should be smooth and free of burrs. Lubricate the lip with the same oil or grease the equipment uses, then drive the seal in with a tube sized to the outer diameter rather than a screwdriver. Where the shaft has a step or groove, wrap it with tape so the lip slides over without damage.

Send the three caliper readings, shaft, housing and height, plus a photo of the old seal. With that we can search an equivalent from the same brand or from another line we carry. We can also tell you whether A 058 is the right design, since one code sometimes covers different lip or material options.

To get a quote on the DBH 8182, message us on WhatsApp or email us code 8182 or the size 24 x 36 x 5.50/7.00 mm. If the machine is still in service, a photo of the housing and shaft helps us judge the surface condition. The seal belongs to the seals and oil seals range we supply, and we can point you to the option that fits your application.