DBH 8129Vit radial shaft seal — 44.2 x 60 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8129Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8129Vit and any equivalents.
The DBH 8129Vit is a radial shaft seal, the type of lip seal pressed into a housing so its elastomeric lip rides against a rotating shaft. It keeps lubricant where it belongs and keeps dust, water and particles out. With a 44.20 mm shaft, 60.00 mm housing and 7.00 mm width, and the Lx-R design, it fits compact spots in gearboxes, pumps, motors and transmission equipment.
The code tells you what you are holding: DBH 8129Vit, an oil seal with a single lip and a spring, identified as Lx-R. Read the dimensions in the usual order: shaft 44.20 mm (d), housing 60.00 mm (D), width 7.00 mm (h). The outer body seats in the bore; the lip, backed by the spring, contacts the shaft and holds oil or grease in while blocking contamination.
Seals with these dimensions show up in gearboxes, centrifugal pumps, electric motors, compressors and belt or chain drives. In each case the job is the same: contain the lubricant and keep out the contaminants that shorten bearing and gear life. Treat it as a wear part and renew it whenever the equipment is opened up.
Before ordering, confirm the shaft diameter sits within the tolerance a radial seal needs and that the running surface is smooth, free of grooves and burrs. The housing bore should be clean and undistorted. On installation, coat the lip with the same oil the equipment uses, keep the spring facing the fluid side, and seat the seal squarely without hammer blows. Rough handling at this stage is a common cause of early leaks.
Looking for an equivalent? Send the code stamped on the old part, the shaft, housing and width measurements, or a photo of the assembly. With that we can search the DBH line or another brand we supply. We will also tell you if Lx-R is not the right lip configuration for your case.
MR Industrial Accessories supplies the DBH brand. For a quote on the 8129Vit seal, message us on WhatsApp or email with the code and we will come back with the technical details for your requirement.
Dimensions
- Shaft (d)
- 44.2mm
- Housing bore (D)
- 60mm
- Height (h)
- 7.00mm
- Design
- Lx-R
Frequently asked questions
- Where is this radial shaft seal used?
- In gearboxes, pumps, electric motors, compressors and transmission equipment where lubricant must be retained and contaminants kept out. It works as long as the shaft and housing match the stated dimensions.
- How do I ask for a quote or an equivalent?
- Contact us on WhatsApp or by email with the code 8129Vit, or with the shaft, housing and width dimensions. We will help you identify the right DBH seal for your equipment.
- What are the dimensions of the DBH 8129Vit oil seal?
- Shaft 44.20 mm, housing 60.00 mm and width 7.00 mm. These correspond to the 8129Vit designation and are the values to check before replacing the seal.