DBH 8108/85 radial shaft seal — 24 x 36 x 7

DBH 8108/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8108/85 and any equivalents.

When a pump, motor or gearbox starts weeping oil around the shaft, the DBH 8108/85 seal is a direct replacement candidate. It is a radial lip seal that sits between the rotating shaft and the housing, holding lubricant in and keeping dust, water and particles out. Its 24 x 36 x 7 mm envelope and A 100 design fit compact assemblies where axial room is tight. MR Industrial Accessories supplies this brand and helps you match the seal to your shaft, housing and operating conditions.

The DBH 8108/85 carries the A 100 designation, which means a single lip with a spring for rotating shafts under lubrication. Key dimensions: shaft 24 mm, housing 36 mm, overall height 7.00 mm. The elastomeric lip rides on the shaft while the spring keeps contact pressure steady; the outer body presses into the housing bore. Because it is a wear part, replace it at the first sign of leakage or contaminant ingress.

You will find a 24 x 36 x 7 mm seal in small centrifugal pumps, low-power electric motors, gearboxes and compact gear cases, compressors, machine tools, and belt or chain drives. Fan, mixer and light conveyor shafts also use it. Its job is to keep the lubricated side separate from the environment, which protects bearings and gears.

Installation notes: inspect the shaft for burrs or marks, confirm the contact surface is smooth, lubricate the lip before sliding it on, and press it in without hammering. Seal selection depends on shaft speed, temperature, lubricant type and differential pressure. In dirty or wet conditions, consider a seal with an auxiliary lip or a more resistant material. MR Industrial Accessories can advise based on your actual application.

If you need an equivalent, send the code 8108/85 or the dimensions 24 x 36 x 7 mm by WhatsApp. A photo of the old seal, the equipment brand or the housing drawing also helps. We then search for alternatives in other brands or series within the same seal category. The dimensions must match the shaft and housing to avoid leaks or an overly tight fit.

MR Industrial Accessories supplies DBH seals as part of its seals and radial shaft seal line. If this code is not the one you need, message us on WhatsApp and we will help you identify the right one. Our team reviews each inquiry with the equipment data and service conditions so the replacement fits correctly.