DBH 8105Sil radial shaft seal — 45 x 60 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8105Sil belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8105Sil and any equivalents.
The DBH 8105Sil radial shaft seal is a lip seal that fits into a housing and seals against a rotating shaft. It keeps lubricant in and contaminants out. With a 45 mm shaft, 60 mm housing and 7.00 mm height, and Lx design, it is a common replacement in pumps, motors and gearboxes. MR Industrial Accessories supplies this brand.
This radial shaft seal is identified by part number 8105Sil and the DBH brand. The dimensions are 45 mm for the shaft, 60 mm for the housing and 7.00 mm for the height. The Lx design refers to a single sealing lip with a spring, intended for rotating shafts that are lubricated. Use the 8105Sil designation when ordering an exact replacement.
Typical applications include centrifugal pumps, electric motors, gear reducers, mixers, fans and belt or chain drives, as well as machine tools and continuous process equipment. In every case, the seal must match the shaft and housing dimensions of the machined bore.
During installation, check that the shaft is free of burrs or wear and that the housing is clean and undamaged. Lubricate the lip before fitting and press the seal in with a support tube that contacts the outer ring, not the lip. If the shaft has a worn track, a seal with an offset lip may be considered. The 7.00 mm height must match the housing depth.
For an equivalent, provide the part number 8105Sil or the dimensions 45 x 60 x 7.00 mm and the Lx design. We can look through the DBH line or other compatible options. We can also advise if a different height or a double-lip seal is suitable for your housing. The aim is to keep your equipment running.
To request a quote, send the part number 8105Sil via WhatsApp or email to MR Industrial Accessories. If you are unsure about size or design, include a photo of the old seal and the shaft and housing dimensions. That helps us respond promptly.
Dimensions
- Shaft (d)
- 45mm
- Housing bore (D)
- 60mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 8105Sil oil seal?
- The DBH 8105Sil oil seal has a 45 mm shaft diameter, a 60 mm housing diameter and a 7.00 mm height. Verify these dimensions before ordering.
- What does the Lx design mean on this oil seal?
- The Lx design indicates a radial shaft seal with a single sealing lip and spring. It is suitable for rotating shafts with lubrication and mounts in machined housings. It is not the same as designs with a double lip or auxiliary lip.
- How do I request a quote or an equivalent?
- Contact MR Industrial Accessories via WhatsApp or email with the part number 8105Sil or the dimensions 45 x 60 x 7.00 mm. For an equivalent, indicate the application and working conditions. We will reply with the options.