DBH 8098Vit radial shaft seal — 85.7 x 100 x 5.3

DBH 8098Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8098Vit and any equivalents.

The DBH 8098Vit is a radial shaft seal built to hold lubricant inside rotating equipment and keep dust and moisture out. Its Lz-R design pairs an elastomeric lip with a spring that keeps steady contact pressure on the shaft, while the metal outer case holds the seal firmly in the housing. Shaft 85.70 mm, housing 100.00 mm, height 5.30 mm. MR Industrial Accessories supplies this brand and helps you match the seal to your application.

Reading the code helps when you reorder. The 8098Vit designation places the seal within the DBH line and covers both its size and its design, so the same reference tells you what you are getting before you pull the old part. The three figures to confirm against your equipment are shaft 85.70 mm, housing 100.00 mm and height 5.30 mm.

Typical service is continuous rotation where oil or grease has to stay in place: gearboxes, centrifugal pumps, electric motors, compressors, transmission shafts and other process equipment. Shafts running with slight misalignment are usually fine, as long as the surface is ground and hard enough to resist wear. In dusty or damp areas the seal also works as a barrier against what is trying to get in.

Installation decides how long the seal lasts. Check that shaft and housing measurements match the values above, and inspect the shaft for grooves, burrs or a rough finish before you start. Lubricate the lip, then drive the seal in with a tool that presses on the outer ring only. If the housing bore is worn, a repair sleeve is an option worth considering.

When you need a replacement, send the code 8098Vit or the dimensions of the seal you are running. We look through the DBH line and the other brands we carry for options that respect the same tolerances and design. If your original part has a different lip configuration or elastomer, tell us and we will point you toward a reliable match.

Quotes are handled by WhatsApp or email. Send the part number or your measurements and the team replies promptly, with equivalent suggestions and help choosing the right seal for the equipment.