DBH 8091 radial shaft seal — 32 x 50 x 10

DBH 8091 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8091 and any equivalents.

The DBH 8091 is a radial shaft seal built to keep lubricant where it belongs and keep dust and water out of equipment with rotating shafts. It fits a 32 mm shaft, a 50 mm housing bore and a 10 mm width, which makes it a common choice for gearboxes, pumps and electric motors. MR Industrial Accessories supplies it as part of its industrial seal line.

This seal carries the DBH brand and part number 8091. Read the size as shaft 32 mm, housing 50 mm, width 10 mm. Its Lx-R-H configuration combines a sealing lip, a reinforced body and a retaining spring, so the lip stays in contact with the shaft while the body holds its shape in the bore.

You will find this type of seal wherever a shaft turns inside a housing and the lubricant has to stay contained: gearboxes, centrifugal pumps, electric motors, compressors, and belt or chain drives. Agricultural machinery, industrial washing equipment and general power transmission systems also use it to shield bearings and gears from contaminants.

Selection comes down to three measurements: shaft diameter, housing bore and available width. The shaft surface should be ground and free of grooves that could wear the lip. Lubricate the lip with the same oil or grease used in the equipment, and press the seal in with a support tube so it seats squarely instead of deforming. Repair any burrs or wear in the housing before installing the replacement.

If 32x50x10 mm is not the size you need, send part number 8091 or the exact shaft, housing and width measurements, plus a photo of the old seal if you have one. We check compatibility against our seal line and come back with equivalent options.

For a quote on the DBH 8091, message us on WhatsApp with part number 8091. Our team helps you confirm the right seal for the application.