DBH 8074Pol radial shaft seal — 96 x 114.3 x 12
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8074Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8074Pol and any equivalents.
When a shaft needs reliable sealing, the DBH 8074Pol oil seal delivers. This radial shaft seal, with its Mx-R design, sits between a rotating shaft and its housing to keep lubricant in and contaminants out. With a 96 mm shaft, 114.30 mm housing and 12.00 mm height, it fits medium to large equipment. MR Industrial Accessories LLC offers it as part of its seals line for industrial maintenance.
The DBH 8074Pol is built around an Mx-R configuration: a sealing lip that rides on the shaft and an outer body pressed into the housing cavity. The lip, typically elastomer, is backed by an internal spring that maintains consistent contact pressure. This makes it a standard replacement for rotating shafts lubricated with oil or grease.
You will find this seal in gearboxes, pumps, electric motors, rollers and transmission equipment where a shaft turns inside a housing. It also appears in agricultural machinery, conveyors and process equipment. Its job is twofold: stop lubricant from escaping and block dust, water or particles from reaching bearings and gears. In dirty or wet conditions, a healthy oil seal helps extend the life of the assembly.
Proper installation starts with inspection: check the shaft for burrs or wear and make sure the housing is clean and undistorted. Lubricate the lip before sliding it into place, and press the seal perpendicular to the shaft without uneven hammering. If the shaft shows a pronounced groove, consider a seal with the lip in a different position. Selection also depends on speed, temperature and lubricant type—details best confirmed with the manufacturer's product page.
Need a substitute? Send the part number 8074Pol or the shaft, housing and height dimensions. With that information we search for alternatives within the DBH line or from other brands we supply. We can also assist if a custom adaptation is required. The more complete the equipment details, the more accurate our proposal.
To request a quote for the DBH 8074Pol oil seal, message us on WhatsApp with the part number. If you are unsure about size or design, include a photo of the old part along with shaft and housing measurements. That helps us confirm the reference and provide a prompt quote.
Dimensions
- Shaft (d)
- 96mm
- Housing bore (D)
- 114.3mm
- Height (h)
- 12.00mm
- Design
- Mx-R
Frequently asked questions
- What are the dimensions of the DBH 8074Pol oil seal?
- It has a 96 mm shaft diameter, a 114.30 mm housing diameter and a 12.00 mm height. These are nominal dimensions. If your shaft or housing is worn, verify tolerances before mounting.
- What applications is this oil seal suitable for?
- It is used on rotating shafts in gearboxes, pumps, motors and transmission equipment. The Mx-R design seals against lubricant leaks and contaminant entry. It works with oil or grease lubrication under normal conditions.
- How do I request an equivalent size or an alternative?
- Write to us on WhatsApp with the part number 8074Pol or with the shaft, housing and height dimensions. You can also send a photo of the part. With that data we look for an option within the DBH line or from other brands we sell.