DBH 6869Vit radial shaft seal — 90 x 110 x 15

DBH 6869Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6869Vit and any equivalents.

The DBH 6869Vit is a radial shaft seal built to hold lubricant inside a housing and keep dirt out along a rotating shaft. It fits a 90 mm shaft, a 110 mm bore and a 15 mm width, a combination found on medium-section shafts. Its Lx-R design carries a main sealing lip plus a second lip that blocks external particles, which helps in dusty or dirty surroundings. Pumps, gearboxes and transmissions are the usual places this seal is replaced.

The code 6869Vit belongs to the DBH line of radial shaft seals. Read the size as shaft 90 mm, housing 110 mm, width 15.00 mm. The Lx-R designation tells you the seal has a primary lip that holds oil or grease and a secondary lip that keeps out dust and other matter. A spring inside presses the elastomer lip evenly against the shaft, so the part must sit in a housing machined to the right finish.

You will find this seal in centrifugal pumps, gearboxes, electric motors, transmission shafts and equipment that runs continuously. In each case it stops lubricant from escaping and shields the bearings behind it from dust, water and chips. The 90 x 110 x 15 mm size suits medium-power machines that need a dependable barrier between the lubricant and the outside. Agricultural and industrial machinery working in harsh conditions also uses it.

Before selecting the seal, confirm the shaft measures 90 mm and the bore 110 mm, and check that the housing depth takes a 15 mm width. Choose the Lx-R design when contaminants are present; in a clean setting a single lip may be enough. Lubricate the lip with the oil used in the machine, keep the seal free of impacts, and inspect the shaft for burrs or marks before fitting. Runout and surface finish on the shaft largely decide how long the seal lasts.

If you need a replacement, send the code 6869Vit or the size 90 x 110 x 15 mm. We can point you to equivalents from other brands and help match the lip style, single or double or with a dust lip, and the elastomer, such as NBR or FKM, to your temperature and fluid. Quotes go out through WhatsApp.

Message the code 6869Vit on WhatsApp to request purchasing options, or ask about other seals in the line. Our team can advise on selection and installation.