DBH 6826Pol radial shaft seal — 65 x 90 x 15

DBH 6826Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6826Pol and any equivalents.

The DBH 6826Pol is a radial shaft seal that sits on the shaft and presses into the housing, keeping lubricant in and contaminants out. Its designation points to a 65 mm shaft, a 90 mm housing bore and a 15.00 mm height, with the Mx-R design. It works as a replacement item on rotating equipment where oil or grease has to stay where it belongs. MR supplies this brand and can help you confirm the size before you send your quote request.

The part number breaks down as follows: DBH is the seal line, 6826Pol is the item designation, and the three figures behind it describe the fit. Shaft 65 mm, housing 90 mm, height 15.00 mm. The Mx-R designation refers to a lip seal with a metal outer body, made to be press-fitted into the housing bore. The section is compact, so it suits rotating shafts that run with permanent lubrication and see moderate contamination.

Typical applications include gearboxes, centrifugal pumps, electric motors, conveyor rollers and other transmission equipment where a shaft passes through a housing. You will also find seals of this type in agricultural machinery, mixers and washing systems, where the job is to keep water and dust away from the bearings. Because it is a wear part, it gets replaced once lubricant starts escaping or dirt works its way in.

Installation is straightforward if you prepare the seat first. Check that the shaft is free of burrs and wear marks, and that the housing bore is clean and not deformed. Coat the lip with the same oil or grease used in the equipment, then drive the seal in with a support tube that presses on the metal body, not on the lip. The 90 mm bore and 15 mm height define the seat depth; a housing with different dimensions calls for a different size.

To request a quote for part number 6826Pol, send the shaft diameter, housing diameter and height you measured by WhatsApp or email. With those three figures our team can locate the equivalent seal in the DBH line or in another brand we supply, and can also advise you if the Mx-R design does not match what came out of your equipment.