DBH 6787 radial shaft seal — 31 x 65.1 x 13
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 6787 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6787 and any equivalents.
The DBH 6787 oil seal is a radial lip seal used to keep lubricant in and contaminants out of rotating equipment. With a 31 mm shaft, 65.10 mm housing and 13 mm height, it fits gearboxes, pumps, electric motors and reducers. MR Industrial Accessories supplies this brand and can help you confirm the right seal for your application.
This radial shaft seal carries the designation 6787. Its dimensions are shaft 31 mm, housing 65.10 mm and height 13.00 mm. The Mx design indicates a sealing lip with spring, intended for rotating shafts with lubrication. DBH is one of the brands we supply, so you can ask about this reference and possible equivalents.
Seals of this size are commonly found in gearboxes, centrifugal pumps, electric motors, compressors and transmission equipment. Their job is to retain lubricant inside the assembly and block dust and water from entering. They are typically used where the shaft rotates at moderate speeds and the working temperature stays within the elastomer's limits.
Proper installation matters. Check that the shaft is free of burrs and wear, and that the housing is clean and undamaged. Lubricate the lip with the same oil or grease used in the equipment, then press the seal in perpendicular to the shaft using a suitable installation tube. If the shaft track is worn, consider an offset lip seal or a repair sleeve.
To quote an equivalent, send part number 6787 or your shaft, housing and height dimensions. With that information we can look for alternatives in the DBH line or from other brands we carry. We can also advise on lip type, elastomer material and spring based on your equipment conditions.
To request a quote for the DBH 6787 oil seal, send the part number on WhatsApp to MR Industrial Accessories. We will reply with the technical information you need to confirm the replacement part is correct for your machine.
Dimensions
- Shaft (d)
- 31mm
- Housing bore (D)
- 65.1mm
- Height (h)
- 13.00mm
- Design
- Mx
Frequently asked questions
- What are the dimensions of the DBH 6787 oil seal?
- The DBH 6787 oil seal has a shaft diameter of 31 mm, a housing diameter of 65.10 mm and a height of 13.00 mm. These dimensions correspond to designation 6787 and should be verified before requesting a quote.
- What applications is this oil seal suitable for?
- It is used in gearboxes, pumps, electric motors and reducers, where it seals lubricant and prevents dust or water from entering. It is a radial lip seal with spring, suitable for rotating shafts with lubrication.
- How do I request a quote or an equivalent?
- Write to us on WhatsApp at MR Industrial Accessories with part number 6787 or with your shaft, housing and height dimensions. We will quote the DBH seal and, if needed, look for an equivalent alternative.