DBH 6710Pol radial shaft seal — 25 x 35 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 6710Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6710Pol and any equivalents.
The DBH 6710Pol is a radial shaft seal designed to retain lubricant and exclude dust, water, and other contaminants around a rotating shaft. With a 25.00 mm shaft diameter, 35.00 mm housing diameter, and 7.00 mm height, it fits common gearboxes, pumps, electric motors, and light-duty transmissions. The Lx design denotes a single sealing lip with a metal outer case, making it suitable for moderate shaft speeds under permanent lubrication.
This seal belongs to the DBH line and is identified by the code 6710Pol. Its dimensions are shaft 25.00 mm, housing 35.00 mm, and height 7.00 mm. The Lx designation means a single lip and an outer metal shell, intended for cylindrical housings and shafts with a fine surface finish. Use the 6710Pol code to order an exact replacement.
Typical uses for a seal of this size include small centrifugal pumps, gearboxes, low-power electric motors, screw compressors, and belt- or chain-driven transmission equipment. In each case, it keeps oil or grease inside the assembly and blocks contaminants from entering, which helps protect bearings and gears.
When installing, verify that the shaft has the correct hardness and roughness, free of burrs or marks that could damage the lip. Lubricate the lip with the same grease or oil used in the equipment, then press the seal in perpendicular to the shaft using a support tube that contacts the outer diameter only, never the lip. If the housing is worn, a seal with a greater height may be considered.
For an equivalent, provide the code 6710Pol along with the shaft, housing, and height dimensions, plus operating conditions such as temperature, speed, and lubricant type. With that information, we can suggest an alternative from the same category or from another brand we supply, confirming dimensional and functional compatibility before quoting.
MR Industrial Accessories LLC supplies the DBH brand. To inquire about this seal or any other sealing component, send a WhatsApp message or email with the code 6710Pol, and our team will respond promptly with a quote.
Dimensions
- Shaft (d)
- 25mm
- Housing bore (D)
- 35mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 6710Pol oil seal?
- The DBH 6710Pol oil seal has a 25.00 mm shaft diameter, a 35.00 mm housing diameter, and a 7.00 mm height. These correspond to the Lx design and should be checked against the housing before installation.
- What type of equipment is this oil seal suitable for?
- It is used in pumps, gearboxes, electric motors, and light-duty transmissions that need to retain lubricant and keep contaminants out. It suits rotating shafts with permanent lubrication and moderate speeds.
- How do I request a quote or an equivalent?
- Send a WhatsApp message or email with the code 6710Pol and the shaft, housing, and height dimensions. Also include temperature, speed, and lubricant so we can offer a compatible alternative from the same category or from another brand we supply.