DBH 6650Pol radial shaft seal — 22.22 x 34.92 x 6.35
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 6650Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6650Pol and any equivalents.
When a rotating assembly starts weeping oil or drawing in grit, the seal is usually the first part to check. The DBH 6650Pol is a radial lip seal built for exactly that job. MR Industrial Accessories supplies this brand and helps maintenance teams confirm the right seal before they install it.
The 6650Pol sits in the DBH line and carries the Mx construction: a sealing lip combined with a metal case. Its three working dimensions are a 22.22 mm shaft, a 34.92 mm housing bore and a 6.35 mm width. That narrow width matters when the cavity behind the bearing gives you little room to work with.
You will find seals of this type on gear reducers, pumps, electric motors, line shafts and other process equipment. Two things happen at once inside the housing: lubricant stays where it belongs, and dust, water and fine particles stay out. Bearings and gears last longer when that barrier holds, especially at moderate speeds and controlled temperatures.
Before ordering, measure the shaft and the housing bore and compare them against the three values above. The 6.35 mm width tells you how much axial space the cavity offers. The Mx lip normally faces the lubricant side; coat the lip with oil or grease before pressing it in so the edge does not roll or tear. If the shaft surface is worn or grooved, a repair sleeve is worth considering.
Working from the 6650Pol code alone is often enough, but shaft and housing measurements help us cross it to another option in the DBH line or to a seal from one of the other brands we carry. Lubricant type and operating conditions sharpen the match further.
To get a quote, send the 6650Pol code by WhatsApp or email. Our team answers quickly and can suggest equivalents or help you confirm the selection.
Dimensions
- Shaft (d)
- 22.22mm
- Housing bore (D)
- 34.92mm
- Height (h)
- 6.35mm
- Design
- Mx
Frequently asked questions
- What size is the DBH 6650Pol seal?
- Shaft 22.22 mm, housing bore 34.92 mm, width 6.35 mm. Check these three against your equipment before installing.
- Will the 6650Pol fit my machine?
- It fits if your shaft, bore and cavity width match the three dimensions listed. If one value is off, send us your measurements and we will look for a match in the DBH line or another brand.
- What does the Mx design mean?
- Mx describes the seal's construction: a lip plus a metal case. Confirm the lip orientation on your equipment drawing, or ask us and we will help you read it.