DBH 6626 radial shaft seal — 170 x 200 x 15
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 6626 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6626 and any equivalents.
The DBH 6626 is a radial shaft seal that keeps oil or grease contained where a rotating shaft passes through a housing. Its dimensions are 170 mm shaft, 200 mm housing and 15.00 mm height, and it uses the Lz lip configuration. You will find it in gearboxes, pumps and mid-to-large transmission units. MR Industrial Accessories supplies this brand and can help you verify the size before you send a quote request.
This seal belongs to the DBH line and carries the code 6626. The three measurements that define it are shaft 170 mm, housing 200 mm and width 15.00 mm. Lz means a single sealing lip with a spring, a setup intended to hold lubricant in and keep dust out under ordinary operating conditions. It is a standard replacement item, chosen by dimension rather than by the equipment it came from.
Typical installations include gearboxes, centrifugal pumps, mixers, chain conveyors and rollers on older or heavy-duty machines. Large electric motors and presses also use this type of seal. In every case the job is the same: stop oil from escaping to the outside and stop dust or water from reaching the bearing or bushing.
Before fitting, inspect the shaft surface for burrs or wear at the contact zone. A new seal on a scored shaft will leak again. Use a caliper to measure the shaft and the housing bore, then compare those readings with the 170 mm and 200 mm values shown here. The 15.00 mm height has to match the housing width. If the shaft is worn, a repair sleeve is worth considering before installation.
If you need an equivalent or another size, send the code 6626 along with the equipment brand and the measurements you took. We will search the DBH line or another brand with comparable performance. Matching shaft diameter, housing diameter, height and lip type is what matters; the brand does not have to be the same as the original.
MR Industrial Accessories supplies the DBH brand. To request a quote for this seal, contact us on WhatsApp with the code 6626 and your shaft and housing measurements. We will respond with the option that fits.
Dimensions
- Shaft (d)
- 170mm
- Housing bore (D)
- 200mm
- Height (h)
- 15.00mm
- Design
- Lz
Frequently asked questions
- What are the dimensions of the DBH 6626 oil seal?
- Shaft diameter 170 mm, housing diameter 200 mm and height 15.00 mm. The design is Lz, with a single lip and spring. Measure your shaft and housing with a caliper to confirm they match these values before ordering.
- Can it replace an oil seal from another brand?
- Yes, as long as the three dimensions match: shaft diameter, housing diameter and height. The fit depends on size, not on the brand. Send us the measurements of the old seal or the equipment code and we will confirm whether this model is compatible.
- How do I request an equivalent?
- Write to us on WhatsApp with the code 6626 and the measurements you need. If the shaft is worn, it is advisable to consider a repair sleeve or move to a slightly different size. With that data we search for the available option.