DBH 6614 radial shaft seal — 140 x 158.75 x 12.7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 6614 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6614 and any equivalents.
The DBH 6614 is a radial shaft seal that keeps lubricant inside and contaminants out by sealing against a rotating shaft. It fits a 140 mm shaft, a 158.75 mm housing bore and a 12.70 mm width, and its Lx design uses a single lip with a spring. This makes it a replacement option for large-diameter shaft positions. MR Industrial Accessories quotes it when you send code 6614 on WhatsApp.
The code 6614 identifies this DBH seal. Its dimensions are shaft 140 mm, housing 158.75 mm and width 12.70 mm. The Lx design refers to a single lip with a spring, where the lip does the main sealing on a rotating shaft. The thin cross-section suits tight mounting spaces in large equipment.
You will find seals like this in gearboxes, pumps, mills, mixers, rollers and power transmission units, wherever a shaft turns inside a housing and oil or grease must stay in. They also work in dusty or wet areas if the lip runs on a ground, lubricated surface. Because it is a wear part, replacement is often planned along with bearing or lubricant service.
Before mounting, confirm the shaft size and remove any burrs or marks. The housing should be clean and its lead-in chamfer in good shape. Lubricate the lip, then press the seal in with a flat driver so the spring does not distort. If the shaft is worn, a lip positioned at a different depth may help. Speed, temperature and lubricant type all affect the choice.
For an equivalent, send code 6614 with your shaft and housing dimensions, a photo of the old seal and the equipment it comes from. With that information we can search the DBH line or other brands we supply. We can also help if your housing bore differs or the available width is smaller.
MR Industrial Accessories supplies the DBH brand. To request a quote for this seal, message us on WhatsApp with code 6614 and your equipment dimensions. We will answer with the option that fits your mounting.
Dimensions
- Shaft (d)
- 140mm
- Housing bore (D)
- 158.75mm
- Height (h)
- 12.70mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 6614 oil seal?
- Shaft 140 mm, housing 158.75 mm and width 12.70 mm. It is a radial shaft seal with Lx design, single lip and spring, as listed for that code.
- How do I ask for an equivalent?
- Send code 6614 on WhatsApp along with the shaft and housing dimensions, a photo of the part and the equipment where it works. We then look for a match in the DBH line or other brands we carry.
- What matters when mounting a seal this size?
- Keep the shaft free of burrs and at the correct size, make sure the housing is clean and has a chamfer, and lubricate the lip before installation. Use a flat driver to avoid deforming the spring. If the shaft is worn, consider a lip at a different position.