DBH 6595 radial shaft seal — 113.71 x 158.77 x 15.87
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 6595 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6595 and any equivalents.
The DBH 6595 is a radial lip seal that keeps oil, grease or water from escaping along a rotating shaft. It sits in the housing bore while its lip rides on the shaft, so lubricant stays in and contaminants stay out. Because the lip wears against the shaft, the seal is a service part: leaks or dirt ingress are the signals to replace it. MR Industrial Accessories supplies it within its seals and oil seals line.
Part number 6595 belongs to the DBH radial shaft seal range. Its three key figures are a 113.71 mm shaft, a 158.77 mm housing bore and a 15.87 mm height, with an Lz lip and body configuration noted on the data sheet. Those three measurements decide whether the part seats correctly, so confirm them against your shaft and housing before installation.
You will find this type of seal on gearboxes, pumps, electric motors, rollers and transmission equipment where a shaft turns inside a lubricated housing. In those positions the seal does two jobs at the same time: it holds the lubricant in and keeps dust, wash water and airborne particles out. That is why it appears in process plants, material handling systems and machinery running continuously.
Selecting a seal takes more than the diameter. Shaft speed, working temperature, the lubricant in use and shaft eccentricity all affect how the lip performs. Even a correctly sized seal will leak if the lip is seated crookedly or the shaft surface is scored. During installation, lubricate the lip, press the seal in without impact and keep the shaft centered. Any burrs in the housing or wear on the shaft should be addressed before the new seal goes in.
If you need an alternative, we can review options within the same seal category. Send the original part number, the shaft, bore and height dimensions, and a photo or sample of the old seal. With that information we can check equivalents from the same brand or another line that suits your equipment.
Forward part number 6595 by WhatsApp or email and we will quote the DBH seal. If you are unsure about the size, include your shaft and housing measurements so we can confirm the right option before you order.
Dimensions
- Shaft (d)
- 113.71mm
- Housing bore (D)
- 158.77mm
- Height (h)
- 15.87mm
- Design
- Lz
Frequently asked questions
- What are the dimensions of the DBH 6595 seal?
- Shaft 113.71 mm, housing bore 158.77 mm and height 15.87 mm, with Lz design. Compare these three values with your equipment before ordering.
- How do I check whether this seal replaces the one I have?
- Measure the shaft, the housing bore and the height of the old part with a caliper. If they read 113.71 x 158.77 x 15.87 mm, the 6595 is the replacement. If they differ, send us the dimensions and we will look for the variant.
- Can I request a size other than the one in part number 6595?
- Yes. Send the original part number or the shaft and housing dimensions by WhatsApp, and we will review alternatives in the DBH seal line or another equivalent brand that fits your application.