DBH 6537 radial shaft seal — 82.39 x 114.3 x 14.28
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 6537 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6537 and any equivalents.
The DBH 6537 radial shaft seal is a lip seal that keeps lubricant in and contaminants out of rotating shaft assemblies. It measures 82.39 mm at the shaft, 114.30 mm at the housing, and 14.28 mm in height. The A 094 design is a single-lip seal with a spring, suited to lubricated rotating shafts. You will find it in gearboxes, pumps, and other industrial equipment where leak control matters.
The 6537 code identifies this exact size in the DBH line. Before replacing a seal, confirm the three dimensions against the shaft and housing: shaft 82.39 mm, housing 114.30 mm, width 14.28 mm. The A 094 designation tells you it is a single-lip, spring-loaded seal for rotating service with lubrication.
Typical installations include gear reducers, centrifugal pumps, electric motors, rollers, and transmission machinery. The seal performs two jobs at once: it holds oil or grease inside the assembly and blocks dust, water, and particles from entering. In applications with vibration or moderate temperature, a correctly chosen seal helps protect bearings and gears.
During installation, check that the shaft is free of burrs and wear, and that the housing is clean and undistorted. Lubricate the lip with the same oil used in the equipment before pressing the seal into place. When selecting a seal, account for peripheral speed, operating temperature, and chemical compatibility between the elastomer and the fluid. If the shaft track is worn, an auxiliary lip or a wear sleeve may be a better fit.
If you need a cross-reference from another brand, send the part number 6537 or the dimensions 82.39 x 114.30 x 14.28 mm. We can also discuss double-lip versions, special materials such as FKM, NBR, or PTFE, and high-speed configurations.
To request a quote for the DBH 6537 seal or to ask about alternatives, message the part number on WhatsApp or by email. Our team replies promptly with the technical information you need to keep your maintenance moving.
Dimensions
- Shaft (d)
- 82.39mm
- Housing bore (D)
- 114.3mm
- Height (h)
- 14.28mm
- Design
- A 094
Frequently asked questions
- What are the dimensions of the DBH 6537 seal?
- The DBH 6537 seal has a shaft diameter of 82.39 mm, a housing diameter of 114.30 mm, and a height of 14.28 mm. Always verify the shaft and housing before installing.
- Where is this seal used?
- It is used in gearboxes, pumps, motors, and rotating equipment to retain lubricant and exclude contaminants. It suits lubricated rotating shafts under moderate temperature and speed conditions.
- How do I request a quote or an equivalent?
- Send the part number 6537 or the dimensions on WhatsApp or by email. We will quote you and, if needed, help you find an equivalent from another brand.