DBH 6302Sil radial shaft seal — 30 x 62 x 7

DBH 6302Sil belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6302Sil and any equivalents.

The DBH 6302Sil is a radial shaft seal that fits into a housing and presses against a rotating shaft. It keeps lubricant in and contaminants out. With a 30 mm shaft, 62 mm housing and 7 mm height, it falls into the medium-section range for 30 mm nominal shafts. Because it is a wear part, it should be replaced when leaks or dirt ingress appear. MR Industrial Accessories supplies it as part of its seals and oil seals line.

This seal is a DBH radial shaft seal with code 6302Sil. Its key measurements are: shaft 30 mm, housing 62 mm, height 7.00 mm. The Lx designation describes the lip and body construction, not a size. These dimensions determine whether the seal will fit: it must seat correctly in the housing and its lip must contact the shaft without looseness or too much interference.

Seals of this size are common in gearboxes, centrifugal pumps, electric motors, rollers and transmission equipment where a shaft passes through a housing. In those spots, the seal serves two purposes: it holds oil or grease inside the assembly and blocks dust, water or particles from reaching bearings or gears. It often appears in continuous-process equipment, where a leak can force unplanned downtime.

When installing a radial shaft seal, make sure the housing and shaft are clean and free of burrs or tool marks. Apply the same oil or grease used in the equipment to the lip before insertion. Use a tube or bushing that presses on the outer diameter, never on the lip. If the shaft has wear or a visible raceway, consider a wear sleeve or a seal with the lip in a different position. Selection should account for shaft speed, temperature and the fluid being retained.

If you need a seal equivalent to the 6302Sil, provide the full code, the shaft, housing and height dimensions, and a photo of the part if available. The code on the old seal also works. With that information we check the match to the DBH line and compatible alternatives. MR Industrial Accessories carries this brand within its seals and oil seals catalog.

To request a quote for the DBH 6302Sil seal, contact us via WhatsApp with the code and quantity. If you have questions about the Lx design or the application, include an image of the assembly and the operating conditions. That helps us confirm the part is correct before preparing the quote.