DBH 6271 radial shaft seal — 22 x 38 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 6271 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6271 and any equivalents.
When a rotating shaft needs a dependable barrier against lubricant loss and incoming dirt, the DBH 6271 lip seal is a common answer. It measures 22.00 mm at the shaft, 38.00 mm at the housing and 7.00 mm in height, so it fits assemblies where there is little room along the axis. MR Industrial Accessories supplies this brand, which lets you order a replacement against a defined reference instead of guessing.
The 6271 belongs to the DBH line of radial shaft seals. Its Lx construction is a single lip with a spring, a layout meant for lubricated rotating shafts. Contact pressure comes from the spring, which keeps the elastomeric lip against the shaft as wear develops over service.
You will find seals in this size range in gearboxes, pumps, electric motors, compressors and power transmission assemblies, where the goal is to hold oil or grease in and keep dust and moisture out of the bearings. Machine tools, conveyors and process equipment are other typical locations. Before fitting, inspect the shaft surface: grooves, scoring or burrs in the lip contact zone shorten seal life.
Installation follows a simple sequence. Clean the bore and the shaft, coat the lip with the oil used in that equipment, then press the seal in squarely until it bottoms out. Do not hit the lip or dislodge the spring. Confirm shaft, housing and height against the part being replaced, and if the shaft is worn, look at a repair size or a sleeve. Operating speed and temperature also have to stay within what the elastomer can handle.
To find an equivalent, give us the code 6271 along with the dimensions of the seal you are removing. A sketch, a photo next to a ruler, or the marking stamped on the seal all work. We then go through the options in the same category and confirm which one suits your equipment without affecting fit or sealing.
Quotes are handled by WhatsApp or email: send the code and the quantity you need, and our team will respond with the correct reference and technical guidance for the application.
Dimensions
- Shaft (d)
- 22mm
- Housing bore (D)
- 38mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- What size is the DBH 6271 shaft seal?
- It is a 22.00 mm shaft, 38.00 mm housing, 7.00 mm height seal. Compare those three values with the part you are removing before ordering.
- How can I confirm the 6271 matches my existing seal?
- Take caliper readings on the shaft, the bore and the seal height. If they read 22, 38 and 7 mm and the lip style is compatible, the 6271 is a candidate. Send us a photo if anything is unclear.
- Can I ask for a different size?
- Yes. Write to us on WhatsApp with the code and the dimensions you require, and we will review the options in the shaft seal category and confirm the best match.