DBH 6175Pol radial shaft seal — 156 x 180.7 x 12.7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 6175Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6175Pol and any equivalents.
The DBH 6175Pol is a radial shaft seal that keeps oil or grease in and dirt or water out where a shaft passes through a housing. Its size and Mz-R lip design suit equipment running at moderate shaft speeds in dusty conditions. MR Industrial Accessories supplies this brand and will confirm the dimensions before quoting.
This oil seal carries the code 6175Pol in the DBH line. Its dimensions are shaft 156 mm, housing 180.70 mm, and height 12.70 mm. The Mz-R designation describes the lip and reinforcement geometry, which is built to hold lubricant and repel contaminants. Before replacing a seal, check that the code matches the one removed from the machine.
Seals of this size commonly appear in gearboxes, pumps, mills, mixers, and power transmission equipment with a shaft near 156 mm. They are also found in older or imported machines where the original seal is hard to source. In those cases, the Mz-R design can help maintain sealing even when the shaft shows slight surface wear.
During installation, clean the housing and shaft, remove burrs or deep marks, and lubricate the lip with the same oil or grease used in the equipment. Press the seal in perpendicular to the shaft, avoiding contact with the lip, using a tube or press that bears on the outer diameter. If the shaft has a groove or wear, consider a wear sleeve before forcing the new part.
For an equivalent, send the code 6175Pol along with the measured shaft diameter, housing diameter, and height. A photo of the old seal and housing also helps. MR Industrial Accessories compares these details against available alternatives and replies with a quote by WhatsApp or email.
Do not rely on the outer diameter alone: a seal can look identical but differ in height or lip type. The designation 6175Pol and the dimensions 156 x 180.70 x 12.70 mm are the reference for ordering. Send the code by WhatsApp or email for a quote.
Dimensions
- Shaft (d)
- 156mm
- Housing bore (D)
- 180.7mm
- Height (h)
- 12.70mm
- Design
- Mz-R
Frequently asked questions
- What are the dimensions of the DBH 6175Pol oil seal?
- It has a 156 mm shaft diameter, 180.70 mm housing diameter, and 12.70 mm height. These are the dimensions listed on the product page. Before ordering, measure the equipment's shaft and housing to confirm they match.
- How do I request a quote for this oil seal?
- Send the code 6175Pol by WhatsApp or email to MR Industrial Accessories. If you have the shaft and housing dimensions, include them so we can send a quote and, if needed, suggest an equivalent.
- What does the Mz-R design mean on this oil seal?
- Mz-R is the designation for the lip and reinforcement design of this oil seal. It is an internal reference of the DBH line, not a standard. For replacement, match the dimensions and lip type.