Skip to main content
All products
DBH type Mx radial shaft seal, double lip with one spring, in section · DBH 6074Pol
DBH 6074Pol radial shaft seal — 125 x 150 x 13

DBHBrand We Carry

DBH 6074Pol radial shaft seal — 125 x 150 x 13

Manufacturer part number6074Pol
Brand
DBH
Category
Seals
Get a quote for 6074Pol on WhatsApp

We reply promptly.

Tell us the quantity you need and request a quote by WhatsApp or email.

Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.

Ask on WhatsAppAsk by email

Description

DBH 6074Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6074Pol and any equivalents.

For rotating shafts that must hold lubricant in and keep contaminants out, the DBH 6074Pol oil seal is a direct replacement option. It fits a 125 mm shaft, a 150 mm housing bore and a 13.00 mm width, and its Mx design combines a sealing lip with a metal body for a firm press fit. You will find this seal in pumps, motors, gear reducers and similar equipment.

The reference breaks down as follows: 6074Pol is the size code within the DBH line, and Mx indicates the lip-and-metal-body configuration. The three dimensions to match are shaft 125 mm, housing 150 mm and width 13.00 mm. Keep the 6074Pol code on hand when you order, and confirm the measurements against the old seal or the equipment drawing before installation.

Typical service locations include centrifugal pumps, electric motors, reducers, mixers and conveyors. At each point, the seal retains oil or grease while blocking dust and water from reaching the bearing or gears. Because the lip wears against the shaft, the seal is a maintenance item: replace it on a scheduled basis or as soon as a leak becomes visible.

Installation calls for a clean housing with no old sealant residue. Inspect the shaft for burrs or scoring that could cut the lip, lubricate the seal before pressing it in, and apply force to the metal body only, never to the lip. If the shaft is worn, a seal with the lip in a different position may be needed. Speed, temperature and lubricant type all influence the final selection.

If you need an equivalent, send the 6074Pol code or the shaft, housing and width dimensions. The team can search for alternatives within the DBH line or from other brands we carry and confirm the technical characteristics. They can also advise whether the Mx design suits your application. MR Industrial Accessories LLC supplies DBH and serves customers throughout the United States and in several Latin American countries. To request a quote, send the 6074Pol code by WhatsApp or email.

Dimensions

Shaft (d)
125mm
Housing bore (D)
150mm
Height (h)
13.00mm
Design
Mx

Frequently asked questions

What are the dimensions of the DBH 6074Pol oil seal?
Shaft 125 mm, housing 150 mm, width 13.00 mm. Always verify against the old seal or the equipment drawing before ordering.
What applications is this oil seal suitable for?
It is used on rotating shafts that need to retain oil or grease and exclude contaminants. Common equipment includes pumps, electric motors and reducers. Final selection depends on speed, temperature and lubricant.
How do I request a quote or an equivalent?
Send the 6074Pol code or the shaft, housing and width dimensions by WhatsApp or email. The team will quote this seal or look for a compatible alternative among the brands we carry.
Get a quote for 6074Pol on WhatsApp
Quote on WhatsApp