DBH 6067 radial shaft seal — 95 x 136 x 13

DBH 6067 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6067 and any equivalents.

The DBH 6067 is a radial shaft seal sized 95x136x13 mm and built to the Lz configuration. It keeps oil or grease where it belongs and blocks dust, water and other contaminants from reaching the bearing cavity. You will find it on rotating shafts in gearboxes, pumps, motors and similar industrial equipment, and MR Industrial Accessories can help you confirm it fits your application.

This seal carries the DBH brand and part number 6067. The three figures you need when measuring a worn unit are shaft 95 mm, housing 136 mm and height 13.00 mm. The Lz designation describes a lip seal with an outer metal flange, which gives the outer diameter enough rigidity for press fitting into a bore. The sealing element is an elastomer chosen for resistance to oils and greases, backed by that metal ring.

Common installations include gear reducers, centrifugal pumps, electric motors, compressors and transmission assemblies, as well as agricultural and mining machinery and conveying systems. In each case the job is the same: hold lubricant in, keep contaminants out, and protect the bearings and gears nearby.

Before ordering, measure both the shaft and the housing bore and compare them with the figures above. The shaft surface should be ground and free of grooves, and its diameter should sit within the recommended tolerance. During installation, coat the lip with the same oil the system runs, press the seal in square to the shaft, and position the spring toward the fluid being retained. A shaft that already shows wear may call for a seal with an auxiliary lip or a repair sleeve.

If the exact seal is not what you need, send the part number or your measurements and the team can look for alternatives in other brands or with minor dimensional differences, provided the operating conditions stay the same. Advice is also available if you only know the make and model of the equipment.

To request a quote, message part number 6067 to MR Industrial Accessories on WhatsApp or by email. A photo of the old seal, or the shaft and housing dimensions, helps confirm the replacement before you order.