DBH 6020 radial shaft seal — 69.85 x 98.45 x 11.9
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 6020 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6020 and any equivalents.
The DBH 6020 is a radial shaft seal built to keep lubricant inside a housing and keep dust, water and other contaminants out. It runs with its lip against a rotating shaft, so the fit between seal, shaft and bore has to be right. The Mz designation identifies the lip and body configuration of this series.
Reading the code and the size: the number 6020 identifies the seal, and the three measurements that define it are shaft 69.85 mm, housing bore 98.45 mm and height 11.90 mm. The Mz design refers to the lip arrangement and body construction used in this series. A seal in this format fits housings machined to those dimensions and works as a barrier on the rotating shaft.
Where this size shows up: gearboxes, pumps, electric motors, rollers and other power transmission assemblies that call for a 69.85 mm shaft. You will also find it in agricultural equipment, process machinery and conveyor drives. Keeping oil or grease where it belongs protects the bearings and gears nearby and cuts down on repairs caused by leakage or grit getting in.
Before you install it, check the shaft and bore against the three dimensions above. The lip goes toward the lubricant, and the shaft surface should be free of burrs, scratches and heavy wear. Put a light film of lubricant on the lip, then seat the seal with a proper driver so the lip is not nicked or rolled. Lip compound and spring choice follow the temperature, speed and fluid in your application, so share those details if you are unsure.
To get a quote on the 6020, send the code or the shaft and bore measurements. We can check equivalents in the same brand or in the other lines we supply, keeping the dimensions and design type intact. Shaft size, outer diameter, height, fluid and operating conditions all help us narrow the options.
Have the code or dimensions ready and message us on WhatsApp or by email. Our team answers quickly and can point you to the right seal or a comparable one for your equipment.
Dimensions
- Shaft (d)
- 69.85mm
- Housing bore (D)
- 98.45mm
- Height (h)
- 11.90mm
- Design
- Mz
Frequently asked questions
- What size is the DBH 6020 oil seal?
- Shaft 69.85 mm, housing bore 98.45 mm and height 11.90 mm. These three values go with the 6020 designation and the Mz design. Measure the old seal or the seat before you order.
- How do I check whether this seal fits my equipment?
- Match the shaft diameter, bore diameter and height to the seal you are replacing, and take the lubricant, temperature and shaft speed into account. If all three measurements line up, the seal should fit.
- Can you supply an equivalent to the DBH 6020?
- Yes. Send the code 6020 or your shaft and bore dimensions on WhatsApp or by email. We look for options in the same brand and in the other brands we carry, keeping the dimensions and design type the same.