DBH 5995Vit radial shaft seal — 54 x 85.09 x 11.9

DBH 5995Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5995Vit and any equivalents.

Part number 5995Vit is a radial shaft seal from the DBH line, built to hold lubricant in and keep contaminants out where a shaft turns inside a housing. Its Mz configuration pairs a main sealing lip with a secondary dust lip, and the internal spring keeps the lip in contact with the shaft during continuous rotation. Shaft 54 mm, housing 85.09 mm, width 11.90 mm. MR Industrial Accessories supplies this brand and can help you confirm the right seal for your equipment.

Reading the number is straightforward: 5995Vit identifies the seal, and the three figures describe where it fits. The 54 mm value is the shaft diameter the lip rides on, 85.09 mm is the bore diameter of the housing that receives the outer case, and 11.90 mm is the overall width. All three must match the bore and shaft of your equipment for the seal to seat squarely and seal properly.

Mz refers to the lip arrangement. A primary lip handles the sealing duty against the rotating shaft, while a second lip sits outboard to block dust and dirt. The elastomer lip works together with the garter spring to maintain contact as the shaft turns. This makes the seal a fit for gearboxes, centrifugal pumps, electric motors, compressors and transmission equipment, where it protects bearings and gears from lubricant loss and from incoming particles. Agricultural machinery, process equipment and production lines are common places to find it.

Installation decides how long the seal lasts. Check the shaft for hardness and surface finish, and remove burrs, nicks or wear marks that could cut the lip. Coat the lip with the same oil or grease used in the unit before pressing the seal in. Use a driver that contacts the outer diameter only, never the lip, and seat it to the full 11.90 mm housing depth so it stays centered and firm.

If you are replacing a worn seal or crossing a reference, send part number 5995Vit or the dimensions you measured. The team can propose equivalents from the same brand or other compatible options while keeping the required tolerances and design, and can also advise on lip material based on the fluid and operating temperature. Quotes are handled by WhatsApp or email with a prompt reply.

Beyond this size, MR Industrial Accessories covers bearings, mounted units and housings, power transmission components, seals, and lubrication and maintenance tools, serving customers throughout the United States and in several Latin American countries.