DBH 5914 radial shaft seal — 110 x 155 x 14
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5914 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5914 and any equivalents.
The DBH 5914 is a radial shaft seal that keeps lubricant inside a housing and keeps dust, water and other contaminants out. With a 110 mm shaft, a 155 mm bore and a 14.00 mm height, it fits medium and large rotating equipment. Because the lip eventually hardens or scores, oil weeping at the shaft is the usual sign that the seal is due for replacement.
The designation to order is 5914, and the size reads as shaft 110 mm, housing 155 mm, width 14.00 mm, in the Lx design. Lx refers to the lip and body configuration of the seal. If you need the elastomer grade or spring details confirmed for a specific service, ask us and we will check the manufacturer's data for that code.
Sizes in this range show up on gearboxes, centrifugal pumps, mills, mixers and power transmission units built around 110 mm shafts. Plants handling food, chemicals or water rely on these seals to keep oil out of the product and off the floor, and to stop washdown water or grit from reaching the bearing. They are also a practical answer on older machines where matching the original bore and shaft matters more than anything else.
Before fitting the seal, check the shaft and bore against the stated values, dress any burrs or grooves on the shaft, and clean the sealing surface. Lubricate the lip, then press the seal in squarely with a driver or tube of the right diameter, keeping the spring in place. The 14.00 mm width is the axial space the seal occupies, so a deeper housing can take a spacer if needed.
When you need an alternative, send the code 5914 or the dimensions 110 x 155 x 14 mm on WhatsApp. Our team compares the Lx design and lip compound against your operating conditions and proposes a seal that does the job. Other heights or diameters can also be sourced when the housing has room for them.
For a quote on the DBH 5914 oil seal, message us on WhatsApp with the code and the quantity you need. We come back with the quote and the seal options that suit your equipment. If the shaft condition or the installation is in question, raise it with us before you pull the old part.
Dimensions
- Shaft (d)
- 110mm
- Housing bore (D)
- 155mm
- Height (h)
- 14.00mm
- Design
- Lx
Frequently asked questions
- What size is the DBH 5914 oil seal?
- It takes a 110 mm shaft and a 155 mm housing bore, with a 14.00 mm height, which matches the 5914 designation. Those figures are marked on the seal. If your shaft or bore measures differently, ask us about an equivalent size.
- Where is this oil seal used?
- Gearboxes, pumps, mills and other equipment with 110 mm shafts where oil has to stay in and dust or water has to stay out. It is a wear part, so it comes up regularly in maintenance planning. Speed, temperature and the fluid involved all affect the final choice.
- How do I get a quote or a replacement?
- Send the code 5914 or the dimensions 110 x 155 x 14 mm on WhatsApp. We quote it and, when needed, look for an equivalent. You can also ask about the Lx design and the lip material.