DBH 5908Pol radial shaft seal — 110 x 140 x 16

DBH 5908Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5908Pol and any equivalents.

A lip seal that sits between a turning shaft and its bore, the DBH 5908Pol keeps lubricant where it belongs and keeps dust, water and particles out. Its Lx-R-H design and its measurements — shaft 110 mm, housing 140 mm, height 16.00 mm — suit gearboxes, pumps, motors and power transmission units built around a shaft of that diameter. MR Industrial Accessories supplies this brand and can verify the size with you before you send your quote request.

The 5908Pol designation identifies this radial shaft seal, and Lx-R-H describes its design. Three values define the part: d (shaft) 110 mm, D (housing) 140 mm and h 16.00 mm. Together they describe a seal with a slim cross-section for a 110 mm shaft, where the sealing lip rides against the shaft and the outer body presses into the bore. Quoting the 5908Pol code is the simplest way to get the same part again, or to search for a dimensional match.

Seals in this size range turn up in speed reducers, gearboxes, centrifugal pumps, electric motors, rollers and other power transmission assemblies. There they do two jobs at once: they hold oil or grease inside the unit, and they stop outside contamination from getting in. On a machined bore and a shaft running at moderate speed, a seal of this type holds up well and helps keep bearings and gears from wearing out early.

Before installing, confirm that the shaft and bore measure 110 mm and 140 mm and that the 16.00 mm height clears the cavity. Lubricate the lip before the shaft goes in, and use an installation tool so the sealing edge is not nicked. Look at the shaft surface as well: a scored or worn track will defeat any seal, even one with the correct dimensions.

When you ask for a quote on an equivalent, give us the 5908Pol code along with the shaft, housing and height values. That is enough for us to search an alternative from the same brand or from another maker that does the same job. Telling us the equipment it fits and the lubricant in use also helps narrow the selection.

MR Industrial Accessories stocks the DBH brand. If the seal is already in your hands, read the code stamped on the body and note the dimensions. Send both to us and we will confirm the 5908Pol is the right choice, then reply with your quote by WhatsApp or email.