DBH 5796 radial shaft seal — 47.63 x 66.62 x 12.7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5796 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5796 and any equivalents.
When a rotating shaft needs to hold lubricant in and keep dust and water out, a radial oil seal like the DBH 5796 does the job. Its designation tells you the three measurements that matter: shaft 47.63 mm, housing 66.62 mm, height 12.70 mm. MR Industrial Accessories supplies this brand and can help you confirm it fits your equipment before you order.
The 5796 is an Mz design: a metal outer body pressed into the housing and a single sealing lip that rides on the shaft. Those three figures in the part designation are not interchangeable with anything close, so measure the old seal or the bore and shaft it came from rather than trusting a visual match. This is a standard-section radial shaft seal built for continuous rotation.
You will find seals of this type on gearboxes, speed reducers, centrifugal pumps, electric motors and drive shafts, wherever a turning shaft passes through a stationary housing. Its role is to keep the bearing lubricated and free of grit or moisture. Treat it as a wear part: once oil starts weeping at the seal area or the surrounding parts get noisy, plan the replacement.
Installation is where most seals fail early. Check that the shaft and bore match the stated sizes, that the shaft is smooth and free of burrs, and that the housing has a chamfer to guide the seal in. Put a little lubricant on the lip, then press on the outer edge with a proper driver. Never strike the lip. Speed, temperature and the fluid being sealed all affect how long it lasts, so tell us those details if you are unsure.
If you want a cross-reference, send the number 5796 or the three measurements off your old part. From there we can look at other options in the same category, including brands we carry, keeping the same design and size range. Where space and service conditions allow, we can also discuss section or material alternatives for the fluid and temperature involved.
To get a quote on the DBH 5796, message us on WhatsApp with the part number or the dimensions you need to replace. We will help you pin down the right seal for the equipment.
Dimensions
- Shaft (d)
- 47.63mm
- Housing bore (D)
- 66.62mm
- Height (h)
- 12.70mm
- Design
- Mz
Frequently asked questions
- What sizes does the DBH 5796 oil seal cover?
- Shaft 47.63 mm, housing 66.62 mm, height 12.70 mm. Those are the nominal figures in the designation, so check them against your equipment before asking for a quote.
- Can this seal replace the one currently in my machine?
- Measure the shaft, the bore and the height of the old seal and compare them with the 5796 values. If they line up and the design is similar, it should work. Send us the measurements on WhatsApp if you want a second opinion.
- Where is this type of seal used?
- On rotating shafts in gearboxes, pumps, motors and similar equipment, where it holds oil or grease in and keeps dust and water out. Speed, temperature and the fluid being sealed all factor into the final choice.