DBH 5714 radial shaft seal — 55.56 x 81 x 19.05
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5714 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5714 and any equivalents.
The DBH 5714 is a radial shaft seal built to keep lubricants in and contaminants out on rotating shafts. It features a shaft diameter of 55.56 mm, a housing diameter of 81 mm, and a height of 19.05 mm, in an A 020 configuration. This seal is commonly used in gearboxes, pumps, and other industrial machinery where leak prevention is essential. MR Industrial Accessories supplies this brand and provides guidance to help you select the right seal for your equipment.
This radial shaft seal is identified by the code 5714 and carries the DBH brand. The A 020 design includes a single lip with a spring, intended for lubricated rotating shafts. The seal is constructed with elastomers and a metal reinforcement, which allows it to perform consistently under continuous operating conditions.
You will find this seal in gearboxes, centrifugal pumps, electric motors, and power transmission systems. In each of these applications, it stops oil or grease from escaping and shields bearings and gears from dust, water, or other particles. As a wear component, it should be replaced during scheduled maintenance to prolong the life of the entire assembly.
For installation, ensure the shaft and housing are clean and free of burrs. Apply a thin coat of the same lubricant used in the application to the seal lip before fitting. Press the seal in squarely using a proper installation tool or tube, and avoid direct hammering. The spring side should face the lubricant. If the shaft surface is worn, a seal with an auxiliary lip may be a better choice.
If you need an equivalent seal, reach out via WhatsApp. We can suggest alternatives in other brands or configurations based on your shaft and housing dimensions. Our team also offers technical advice on lip material and spring type according to speed, temperature, and fluid.
To request a quote for the DBH 5714 seal, send the code 5714 and the quantity you need through WhatsApp. We will respond promptly with shipping options. If you are unsure about the application, our technical staff can help verify that this reference is suitable for your equipment.
Dimensions
- Shaft (d)
- 55.56mm
- Housing bore (D)
- 81mm
- Height (h)
- 19.05mm
- Design
- A 020
Frequently asked questions
- What are the dimensions of the DBH 5714 seal?
- The DBH 5714 seal measures 55.56 mm on the shaft, 81 mm on the housing, and 19.05 mm in height. These dimensions correspond to the A 020 design, which includes a spring-loaded lip for rotating shafts.
- What applications does this seal have?
- It is used in gearboxes, pumps, electric motors, and transmission equipment. Its purpose is to retain lubricant and block contaminants, protecting bearings and gears. It is a wear part that should be replaced during preventive maintenance.
- How do I request a quote or an equivalent?
- Contact us on WhatsApp with the code 5714 and the quantity you need. If you require an equivalent or a different size, let us know and we will offer options. We can also advise on material and lip type based on your application.