DBH 5654Vit radial shaft seal — 70 x 85 x 8
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5654Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5654Vit and any equivalents.
For rotating shafts that need reliable sealing, the DBH 5654Vit radial shaft seal offers a compact solution. With a 70 mm shaft, 85 mm housing bore and 8.00 mm height, it fits many medium-power assemblies. As a wear part, it should be replaced when leakage or noise appears. MR supplies this seal and can help you confirm the size or find an equivalent.
The DBH 5654Vit is an Mz-design lip seal. Its code reflects the dimensions: 70 mm shaft, 85 mm housing bore, 8.00 mm height. An elastomer lip contacts the rotating shaft to keep lubricant in and contaminants out, while the metal outer case holds the seal firmly in the housing. It belongs to the DBH radial shaft seal line, which MR carries.
You will find this seal in gearboxes, pumps, electric motors, transmission shafts and other industrial equipment with rotating shafts. It also serves in automotive and agricultural machinery. The 70x85x8 mm size is common in medium-power applications. Replace it if you see oil weeping, a hardened lip or visible wear, before bearings and gears suffer damage.
During installation, inspect the shaft for burrs or marks and make sure the sealing surface is clean and lightly lubricated. The housing bore must be clean and deep enough so the seal sits flush or slightly recessed. Use a driver that presses only on the metal case, never on the lip. If the shaft is worn, a repair sleeve or a different size may be needed.
To source an equivalent, share the code stamped on the old seal, the shaft, bore and height measurements, and a photo if available. MR can check its seal line for a match and advise if the Mz design does not suit your application. The goal is to keep your equipment running without downtime for a wear part.
MR supplies seals and radial shaft seals for many applications. If the DBH 5654Vit is the right one, send the code via WhatsApp or email for a quote. If you are unsure about the size, ask and the team will help you confirm it before you order.
Dimensions
- Shaft (d)
- 70mm
- Housing bore (D)
- 85mm
- Height (h)
- 8.00mm
- Design
- Mz
Frequently asked questions
- What are the dimensions of the DBH 5654Vit seal?
- It has a 70 mm shaft diameter, an 85 mm housing bore and an 8.00 mm height. Verify these on your equipment before ordering.
- Where is this seal used?
- It seals rotating shafts in gearboxes, pumps, motors and transmissions, retaining oil or grease and blocking dust. The 70x85x8 mm size suits medium-power equipment.
- How do I request a quote or an equivalent?
- Contact MR on WhatsApp or by email with the code 5654Vit or your seal dimensions. If unsure, send a photo and the shaft and housing sizes, and the team will reply with a quote.