DBH 5635 radial shaft seal — 34.85 x 46.43 x 11.11
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5635 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5635 and any equivalents.
Part number 5635 from DBH is a radial shaft seal built around the Mx single-lip, spring-loaded design. Reading the size off the code: the seal fits a 34.85 mm shaft, presses into a 46.43 mm housing bore and measures 11.11 mm in height. MR supplies this DBH seal, so you can confirm the number or ask about a cross-reference directly with our team.
In service, the outer case stays fixed in the housing bore while the spring-loaded lip rides against the rotating shaft. That arrangement keeps oil or grease inside the assembly and keeps dust, water and particles out. Because the Mx profile is compact in the axial direction, it suits spots where there is little room along the shaft.
Typical installations include gearboxes, pumps, electric motors, transmission shafts and process equipment. Maintenance crews also fit this type of seal on agricultural machinery and production lines. Its job is to shield bearings and gears from contamination and to limit lubricant loss, which helps the assembly reach its expected service life.
Before fitting, confirm the three dimensions against the shaft and bore, and make sure both surfaces are clean and free of burrs or scratches. Put a light film of lubricant on the lip, then seat the seal square to the shaft; avoid hitting the lip itself. Where the shaft is already worn, a seal with the lip positioned at a different point may work better. Speed, temperature and the lubricant in use all influence the final choice.
To request a quote for 5635, send the shaft diameter, housing diameter and height of the seal you are replacing through WhatsApp. Our team can point you to options in the DBH line or to other brands we carry, and can also help identify the part from a data sheet or a sample.
DBH is one of the brands MR carries. If you want to check the application or verify this part number, message us on WhatsApp and we will get back to you.
The seal is identified by part number 5635, and its dimensions are a 34.85 mm shaft, a 46.43 mm housing bore and an 11.11 mm height.
Dimensions
- Shaft (d)
- 34.85mm
- Housing bore (D)
- 46.43mm
- Height (h)
- 11.11mm
- Design
- Mx
Frequently asked questions
- What size is the DBH 5635 oil seal?
- It is made for a 34.85 mm shaft, a 46.43 mm housing bore and an 11.11 mm height, in the Mx design. If your shaft or bore measures differently, ask us about an equivalent.
- Where is this oil seal used?
- On rotating shafts in gearboxes, pumps, motors and general industrial equipment, where lubricant has to stay in and contaminants have to stay out. It is also a common replacement item on agricultural and industrial machinery.
- How do I request a quote or an equivalent?
- Send part number 5635, or the dimensions of the seal you are replacing, by WhatsApp to MR. We will quote it and, if needed, look for an alternative in the DBH line or in other brands we carry.