DBH 5583 radial shaft seal — 42 x 65 x 12
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5583 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5583 and any equivalents.
The DBH 5583 is a radial shaft seal that keeps lubricant in and contaminants out where a rotating shaft passes through a housing. It is identified by part number 5583 and fits a 42 mm shaft, a 65 mm housing bore and a 12.00 mm height, with an Mz design. MR supplies this brand and quotes it for you by WhatsApp or email.
This seal belongs to the DBH line and carries the designation 5583. The dimensions to compare are shaft 42 mm, housing 65 mm and height 12.00 mm, and the design is Mz. The lip runs on the 42 mm shaft while the outer body seats in a 65 mm bore that is 12 mm deep. Because the Mz construction is specific, keep that designation when you replace the part.
Seals in this size range are common where a shaft exits a gearbox, pump, mixer, conveyor or machine tool, and they also appear in electric motors and transmission rollers. Their job is to hold oil or grease inside the bearing or gear area and to block dust and water from getting in. In dirty or abrasive conditions, the seal usually works together with a labyrinth or dirt guard.
Check the shaft and housing before installation. The shaft should be free of burrs, deep scratches and wear at the lip area, and the housing must be clean and undistorted. Coat the lip with the same oil or grease used in the equipment, then press the seal in evenly without hitting it sideways. A guide sleeve helps if the shaft has a step or groove. The 12.00 mm height should sit flush or as the equipment manufacturer specifies.
To request a quote for part number 5583, send the part number along with the shaft, housing and height dimensions. That lets us check an alternative from the same brand or another line, as long as the shaft diameter, outer diameter and width match. It also helps to mention the fluid, operating temperature and shaft speed, since these affect the lip material and spring choice.
Dimensions
- Shaft (d)
- 42mm
- Housing bore (D)
- 65mm
- Height (h)
- 12.00mm
- Design
- Mz
Frequently asked questions
- What are the dimensions of the DBH 5583 oil seal?
- The DBH 5583 has a 42 mm shaft diameter, a 65 mm housing diameter and a 12.00 mm height. The design is Mz. Compare these values before replacing the old seal.
- How do I request a quote for this oil seal?
- Send part number 5583 by WhatsApp or email to MR. If possible, include a photo of the old seal and the shaft and housing dimensions. With that we can quote the part and, if needed, look for an equivalent alternative.
- Will it fit any 42 mm shaft?
- No. The 65 mm housing diameter and the 12.00 mm height must also match. The condition of the shaft and housing affects sealing too; if the shaft is scratched or worn, the seal may not seal properly.