DBH 5556Vit radial shaft seal — 17 x 35 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5556Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5556Vit and any equivalents.
A radial shaft seal in the DBH 5556Vit range, this lip seal sits in the housing bore and works against the rotating shaft, keeping lubricant in and dirt, water and particles out. Its three key measurements are a 17.00 mm shaft, a 35.00 mm housing bore and a 7.00 mm height, with the Lz design. MR Industrial Accessories carries it in the seals line.
The designation to quote is 5556Vit. Read the size the way a seal catalog does: shaft 17.00 mm, housing 35.00 mm, width 7.00 mm. The Lz designation describes how the lip and body are built for a rotating shaft application.
Typical service is in gearboxes, electric motors, centrifugal pumps, fan shafts and other power transmission equipment where oil or grease has to stay separated from the surroundings. Machine tools, conveyors and continuous process lines use the same size. Shafts running at low to medium speed inside thin-wall housings are where this 17 x 35 x 7 mm combination shows up most often.
Before pressing one in, confirm the shaft is clean with no burrs or scoring, and put a film of lubricant on the lip. Drive the seal in square to the housing bore and avoid hitting the lip directly. Shaft speed, operating temperature and the fluid being retained all matter at selection time; hot oil or a dusty environment may call for a different compound, so treat Lz as a reference point rather than the only choice.
If you need a substitute from another brand in the same family, we can cross it. Send the shaft diameter, housing diameter and height, and if possible a photo of the old seal or the code marked on it. From there we review sealing options that do the same job.
Quote requests go through WhatsApp or email at MR Industrial Accessories. Send the code 5556Vit or the dimensions 17 x 35 x 7 mm. If you want to confirm the Lz design or talk through installation, our team will go over it with you and suggest equivalents.
Dimensions
- Shaft (d)
- 17mm
- Housing bore (D)
- 35mm
- Height (h)
- 7.00mm
- Design
- Lz
Frequently asked questions
- What are the dimensions of the DBH 5556Vit seal?
- Shaft 17.00 mm, housing 35.00 mm, height 7.00 mm. Checking those three against the seal you are removing is the quickest way to confirm the match.
- What does the Lz design mean on this seal?
- Lz is the manufacturer's designation for the lip and body configuration. Comparing it with the original seal, or sending us the equipment data, is the surest way to confirm it fits your application.
- How do I request a quote for the 5556Vit?
- Message MR Industrial Accessories on WhatsApp or by email with the code 5556Vit or the dimensions 17 x 35 x 7 mm. We can also check the seals line for an equivalent.