DBH 5549 radial shaft seal — 35.8 x 68 x 10
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5549 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5549 and any equivalents.
The DBH 5549 is a radial shaft seal that keeps lubricant in and contaminants out of rotating assemblies. Its Mx profile uses a single lip with a spring, and the dimensions are 35.80 mm shaft, 68 mm housing and 10 mm height. DBH is a brand MR supplies, so you can request this part number for gearboxes, pumps, motors and transmissions.
This seal is identified by the designation 5549. The critical measurements are: shaft diameter (d) 35.80 mm, housing diameter (D) 68 mm and height (h) 10.00 mm. The Mx design indicates a standard single-lip with spring for rotating shafts. These figures come from the manufacturer's data sheet and determine interchangeability with other seals of similar size.
You will find this seal in gearboxes, centrifugal pumps, electric motors, compressors and power transmission equipment. It performs two jobs: it stops oil or grease from escaping and blocks dust, water or particles that could harm bearings and gears. Because of its size, it suits medium-sized equipment that needs dependable sealing under continuous rotation.
When selecting this seal, confirm that your shaft and housing dimensions match the values above. The 10 mm height must fit the housing depth. During installation, lubricate the lip with the same oil or grease used in the equipment, protect the lip from sharp edges and check that the spring is seated correctly. If the shaft is worn, a repair sleeve or an alternative size may be needed.
For an equivalent, contact us with part number 5549 or the dimensions 35.80 x 68 x 10 mm. We can help you find the right option in our seal line and advise on compatibility with other brands and configurations. MR supplies DBH.
To request a quote for the DBH 5549 seal, send the part number by WhatsApp to MR. If you are unsure about the application, include a photo of the housing or the shaft and housing dimensions for a more precise check. We are available to help you choose the correct seal for your equipment.
Dimensions
- Shaft (d)
- 35.8mm
- Housing bore (D)
- 68mm
- Height (h)
- 10.00mm
- Design
- Mx
Frequently asked questions
- What are the dimensions of the DBH 5549 seal?
- The DBH 5549 seal has a shaft diameter of 35.80 mm, a housing diameter of 68 mm and a height of 10 mm. These dimensions are listed in the manufacturer's data sheet and define its fit in equipment with those shaft and housing dimensions.
- What does the Mx design mean in this seal?
- The Mx design is a standard single-lip configuration with a spring, intended for rotating shafts. It is a common design in radial shaft seals for retaining lubricant and keeping contaminants out in general industrial applications.
- How do I request a quote or an equivalent?
- You can send the part number 5549 by WhatsApp to MR. If you need an equivalent, provide your shaft and housing dimensions or the original seal's part number. We can help you find the right option within our seal line.