DBH 5537 radial shaft seal — 41.28 x 60.3 x 9.52
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5537 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5537 and any equivalents.
Part 5537 from the DBH line is a radial shaft seal built around an Mz configuration, which pairs a sealing lip with a metal case for press-fit seating. Its dimensions are shaft 41.28 mm, housing bore 60.30 mm and height 9.52 mm. Maintenance teams turn to this size when oil, grease or water has to stay on one side of a rotating shaft in gearboxes, pumps, motors and similar machinery.
Reading the number is straightforward: 5537 identifies the seal within the DBH range, while the three figures describe where it fits. The first value, 41.28 mm, is the shaft diameter the lip runs against. The second, 60.30 mm, is the bore in the housing that receives the outer case. The third, 9.52 mm, is the overall height, so the cavity has to match that depth for the seal to seat correctly.
You will find this size doing service in gearboxes, centrifugal pumps, electric motors, compressors and conveyor rollers. In each case the seal keeps lubricant where it belongs and blocks dust and particles from reaching bearings and gears. That makes it a common sight on production lines, process plants, and agricultural or road equipment where shafts rotate in dirty or wet surroundings.
Fitting a replacement calls for a clean shaft and housing with no burrs or scratches. Coat the lip with the same oil or grease the machine runs on, then press on the outer ring only, never on the lip. A shaft that shows wear may call for a repair sleeve or a different size. Speed, temperature and the fluid being retained all factor into the selection.
If 5537 is not what you need, or you want a second option, send the part number, the dimensions or a photo of the old seal through WhatsApp or email. The team can suggest equivalents from other brands or series as long as shaft and housing tolerances line up. Quotes go out quickly, and help identifying an unmarked part is available too.
Dimensions
- Shaft (d)
- 41.28mm
- Housing bore (D)
- 60.3mm
- Height (h)
- 9.52mm
- Design
- Mz
Frequently asked questions
- What size shaft and bore does the DBH 5537 seal fit?
- It suits a 41.28 mm shaft and a 60.30 mm housing bore, with an overall height of 9.52 mm. Confirm these three values against the shaft and cavity before ordering.
- What does the Mz designation mean on this seal?
- Mz refers to the construction of the seal: a sealing lip combined with a metal case designed to be pressed into the housing. Check the manufacturer's data sheet or ask the MR team for the finer technical points.
- How do I get a quote for the 5537 seal?
- Send part number 5537 by WhatsApp or email to MR Industrial Accessories. If the number is not at hand, share the dimensions or a photo and the team will help pin down the right seal.