DBH 5534 radial shaft seal — 45 x 59 x 10

DBH 5534 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5534 and any equivalents.

The DBH 5534 is a radial shaft seal from the DBH line, built in the Mz configuration. It keeps lubricant where it belongs and blocks dust, water and other contaminants from reaching the bearing. The size designation reads shaft 45.00 mm, housing 59.00 mm, height 10.00 mm. MR Industrial Accessories supplies this seal as part of its seals and radial shaft seal range.

This seal carries the DBH designation with reference 5534, and the Mz code points to a particular internal construction within that family. The three figures that matter when matching it are the shaft diameter (d) at 45.00 mm, the housing bore (D) at 59.00 mm and the height (h) at 10.00 mm. It is a press-fit part: the outer edge seats in the housing, while an elastomeric lip rides against the rotating shaft.

You will find seals of this type in gearboxes, pumps, electric motors, conveyor rollers and other power transmission assemblies. They do two jobs at once: hold the oil or grease in around the bearing, and keep outside contamination out. Where dust, chips or moisture are present, a seal that is still doing its job is what keeps bearings and gears running instead of failing between scheduled stops.

When selecting a replacement, confirm that both the shaft and the housing match the original. The Mz configuration can differ in lip profile or in whether a dust guard is included, so if the seal you are removing has a different shape, check with us before ordering. On installation, coat the lip with the grease or oil used in that application, keep the seal square as you press it in, and inspect the shaft for burrs or a worn sealing surface.

Looking for an equivalent? The quickest route is to send the full seal code, a photo of the part and caliper readings. From there we can search alternatives within the same brand or elsewhere in our line. We can also help when the housing bore is slightly off or the space available for width is tighter than the original.

For a quote on the DBH 5534 or to ask about other sizes, reach us on WhatsApp or by email with the code, the dimensions or a photo. Our team handles technical questions and helps you pin down the right part.