DBH 5513 radial shaft seal — 30 x 47 x 8
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5513 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5513 and any equivalents.
The DBH 5513 is a radial shaft seal that keeps lubricant in and contaminants out of rotating equipment. With an Mx design and a 30 mm shaft, 47 mm housing and 8 mm height, it fits applications where axial space is tight. MR Industrial Accessories supplies this seal and helps you confirm the correct size for your machine.
This seal carries the designation 5513 and the Mx design. Its dimensions are shaft 30 mm, housing 47 mm and height 8.00 mm. The Mx design means a single lip with a spring, intended for rotating shafts that run with lubrication. Always check these three dimensions against the shaft and housing before installation.
Typical uses include gearboxes, pumps, electric motors, compressors, mixers and transmission equipment. It also appears in agricultural machinery, conveyors and hydraulic systems where oil or grease must be contained and bearings protected. Because it is a wear part, a hardened or marked lip will begin to leak and the seal should be replaced.
For selection, confirm that the shaft diameter falls within the recommended tolerance for radial shaft seals and that the housing has the correct diameter and depth. The shaft surface should be ground and free of grooves that can damage the lip. During mounting, lubricate the lip with the same oil or grease used in the equipment and use a support tube to prevent deformation. If the shaft is worn, consider a seal with an auxiliary lip.
If you need an equivalent, send the code 5513 or the current dimensions (shaft, housing and height) along with the fluid to be retained. With that information we look for alternatives in the same brand or another brand we supply, keeping the Mx design and tolerances. We can also advise you if the axial space requires a different height.
To request a quote for the DBH 5513 seal, send the code by WhatsApp or email to MR Industrial Accessories. We will quote and help you verify that the 30 x 47 x 8 mm dimensions suit your equipment. If unsure, send a photo of the old seal and caliper readings.
Dimensions
- Shaft (d)
- 30mm
- Housing bore (D)
- 47mm
- Height (h)
- 8.00mm
- Design
- Mx
Frequently asked questions
- What dimensions does the DBH 5513 seal have?
- The DBH 5513 seal has a 30 mm shaft diameter, 47 mm housing diameter and 8.00 mm height, with an Mx design. Verify these against your shaft and housing before ordering.
- How do I know if the Mx design is right for my equipment?
- The Mx design is a single lip seal with spring, suitable for rotating shafts with lubrication. If your equipment operates with high pressure or heavy dirt, another design may be better. Contact us with your application details.
- Can I replace the 5513 with a seal from another brand?
- Yes, as long as the shaft, housing and height dimensions match and the design is compatible. Send the code or dimensions by WhatsApp or email and we will offer alternatives from the brands we supply.