DBH 5495 radial shaft seal — 56 x 76.4 x 12.7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5495 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5495 and any equivalents.
The DBH 5495 is a radial shaft seal built to keep lubricant inside rotating equipment while keeping dust, water, and other contaminants out. Its Lx configuration pairs a flexible sealing lip with a metal case that press-fits into a fixed housing. This seal is commonly found in gearboxes, pumps, electric motors, and power transmission systems where bearings and gears need reliable protection.
Part number 5495 from DBH comes with a shaft diameter of 56 mm, a housing bore of 76.40 mm, and a height of 12.70 mm. The Lx designation indicates a seal with a sealing lip and a metal outer case. Before ordering, confirm these measurements against your existing seal—even small differences in shaft or bore size will affect fit and performance.
Seals of this size are typically used in gearboxes, speed reducers, centrifugal pumps, electric motors, and other power transmission equipment. In each case, the seal does two jobs: it stops oil or grease from leaking out of the housing and blocks external contaminants from getting in. By protecting bearings and gears, it helps extend equipment life and reduce downtime.
For correct installation, make sure the shaft is free of burrs and wear, and that the lip contact area is clean and lightly lubricated. Press the seal into the housing perpendicular to the shaft, using a tube or socket that pushes on the metal edge—never on the lip. A chamfer on the housing makes insertion easier and reduces the risk of damage. Once seated, the lip should sit evenly on the shaft.
To get a quote for part number 5495, send the dimensions of your old seal—shaft diameter, housing bore, and height—via WhatsApp or email. A photo of the seal and housing also helps us confirm the lip type and material. With that information, we can suggest an equivalent from the DBH line or another brand we carry.
For ordering or technical questions, message us on WhatsApp with part number 5495 or your dimensions. We can help you choose the right seal and advise on installation or selection before you buy.
Dimensions
- Shaft (d)
- 56mm
- Housing bore (D)
- 76.4mm
- Height (h)
- 12.70mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 5495 oil seal?
- The DBH 5495 has a shaft diameter of 56 mm, a housing bore of 76.40 mm, and a height of 12.70 mm. These are the dimensions listed for this part number. Compare them with the seal you are replacing to ensure a proper match.
- What applications is the DBH 5495 suitable for?
- It is used in gearboxes, pumps, electric motors, and transmission equipment where lubricant retention and contaminant exclusion are needed. The Lx design with a lip and metal case works well for rotating shafts inside fixed housings. If your equipment runs at high speed or temperature, ask us to evaluate the lip material.
- How do I request a quote or find an equivalent?
- Send part number 5495 via WhatsApp or email to MR. If you don't have the part number, provide the dimensions of the old seal—shaft, housing, and height—or a photo. We will look for an equivalent among the brands we carry and respond with a quote.