DBH 5468 radial shaft seal — 100 x 125 x 13

DBH 5468 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5468 and any equivalents.

A radial shaft seal in the DBH line, the DBH 5468 keeps lubricant where it belongs and keeps dust, water and particles out of a housing. With a 100 mm shaft, a 125 mm housing bore and a 13.00 mm height, it fits gear cases, pumps, electric motors and power transmission equipment. MR Industrial Accessories supplies this brand and helps you match the seal to the application.

The code breaks down simply: DBH is the seal family, 5468 is the item reference, and Lz describes how the lip and metal case are built. Shaft 100 mm, housing 125 mm, height 13.00 mm. The lip rides on the rotating shaft while the outer diameter is pressed into the bore, so the assembly holds grease or oil in and keeps contamination out of the bearings.

You will find this seal in gear cases, centrifugal pumps, electric motors, reducers and transmission equipment. In every case the job is the same: contain the lubricant and stop the grit and moisture that shorten bearing and gear life. Treat it as a wear part. Leaks, unusual noise or shaft movement are the usual signals that it is time to replace it.

Before installation, inspect the shaft for burrs or a wear groove and make sure the bore is clean and undistorted. Coat the lip with the same oil or grease used in the machine, then seat the seal square to the shaft without hammering on the lip. If the shaft is grooved, a seal with the lip in a different position may be the better choice. Speed, temperature and lubricant type all affect the selection.

Need an equivalent or another size? Send the code 5468 or your current seal dimensions (shaft, housing, height) by WhatsApp or email. The team can look for an alternative in the same DBH line or in other brands supplied, and can advise on the lip design that suits your level of dirt and water exposure.