DBH 5395Vit radial shaft seal — 90 x 110 x 13

DBH 5395Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5395Vit and any equivalents.

The DBH 5395Vit is a radial shaft seal engineered for rotating shafts, providing a reliable barrier against lubricant loss and contaminant entry. With a shaft diameter of 90 mm, housing bore of 110 mm, and height of 13 mm, it fits common industrial equipment. MR supplies this seal and helps you select the right configuration for your machinery.

Part number 5395Vit from the DBH line designates a seal with an Lz configuration: a primary sealing lip plus a dust lip. The elastomer lip maintains controlled contact with the shaft, while the outer diameter ensures a tight fit in the housing bore. Dimensions are shaft 90 mm, housing 110 mm, height 13.00 mm. This is a wear component typically replaced during preventive maintenance.

Typical installations include gearboxes, speed reducers, centrifugal pumps, electric motors, and power transmission assemblies. The seal mounts in the cover or housing to seal the shaft passage. It also serves rollers, mixers, and process machinery where dust, water, or debris are present. The 90 x 110 x 13 mm size covers a common range in mid-sized equipment.

Before installation, inspect the shaft for burrs or wear and ensure the housing is clean and undamaged. Lubricate the lip with the same grease or oil used in the equipment. Apply pressure only to the outer ring, never to the lip. When choosing a replacement, consider shaft speed, operating temperature, and elastomer compatibility with the lubricant. For high-vibration applications, a stiffer design may be needed.

To request a quote, send the part number 5395Vit or the dimensions 90 x 110 x 13 mm via WhatsApp. Include shaft and housing diameters, fluid type, and service temperature. MR compares your data with options from DBH and other lines to avoid installation errors and recommend the best fit.