DBH 5394Sil radial shaft seal — 85 x 110 x 13
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5394Sil belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5394Sil and any equivalents.
The DBH 5394Sil is a radial shaft seal that keeps lubricant in and contaminants out of rotating equipment. It fits a 85 mm shaft, a 110 mm housing bore and is 13.00 mm wide. The Lx designation means a single lip with a spring. You will find it in gearboxes, pumps, motors and rollers, and it can be replaced by equivalent seals from other makers because its dimensions are standard.
This seal belongs to the DBH line; 5394Sil is the code you use to identify it. The Lx design has one lip with a spring, which handles moderate shaft speeds while holding oil or grease and blocking dust and water. Correct selection depends on how fast the shaft turns, the temperature and the fluid being sealed.
Common places for this seal include gearboxes, centrifugal pumps, electric motors, conveyor rollers and power transmission units. In each case it protects bearings and internal parts from particles and lubricant loss. It also appears in agricultural and industrial machinery with continuous rotation. The 85 x 110 x 13 mm size is a common range for medium-power equipment.
Before installing, check that the shaft is hard and smooth enough, with no burrs or marks that could harm the lip. Coat the lip with the same oil or grease used in the machine. Press the seal into the housing squarely, using a tube that pushes on the outer diameter, never on the lip. If the housing is worn, a repair sleeve is an option. Consider shaft speed and working temperature to get long service life.
If you need an equivalent, send us a message on WhatsApp with code 5394Sil or the dimensions 85 x 110 x 13 mm. We can suggest alternatives from the same brand or other manufacturers that match the mounting dimensions. We also advise on the Lx design and its variants for your application. MR Industrial Accessories helps you find the right seal for your equipment.
Dimensions
- Shaft (d)
- 85mm
- Housing bore (D)
- 110mm
- Height (h)
- 13.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 5394Sil seal?
- It has a shaft diameter of 85 mm, a housing diameter of 110 mm and a height of 13.00 mm. These are standard dimensions, so it can be interchanged with other seals of similar characteristics.
- What applications is this seal suitable for?
- It is used in gearboxes, pumps, electric motors, rollers and transmission equipment. Its job is to retain lubricant and keep contaminants out on rotating shafts.
- How do I request a quote or an equivalent?
- Write to us via WhatsApp with code 5394Sil or the dimensions 85 x 110 x 13 mm. We will provide a quote and, if needed, look for an equivalent that fits your equipment.