DBH 5385Pol radial shaft seal — 85 x 105 x 13

DBH 5385Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5385Pol and any equivalents.

The DBH 5385Pol is a radial shaft seal that fits between a rotating shaft and a stationary housing. It keeps lubricant in and keeps dust, water, and other particles out. The code tells you the size: 85 mm shaft, 105 mm housing, and 13.00 mm height. You will find this seal in gearboxes, pumps, and other power transmission equipment that runs on oil or grease.

This seal carries the DBH 5385Pol code and the Lx design. In the Lx style, you get a single lip with a spring, which suits rotating shafts that see continuous lubrication. The key measurements are shaft 85 mm, housing 105 mm, and height 13.00 mm. DBH is one of the brands we supply, so we identify the part by its original code to help you match it correctly.

You will typically see a seal this size in gearboxes, electric motors, centrifugal pumps, rollers, and power transmission units. Its job is to close the gap where the shaft passes through the housing, holding oil or grease in and keeping contaminants out. In dusty, wet, or washdown-heavy areas, a failed seal can disrupt the whole machine, so it pays to check it during maintenance.

When installing a radial shaft seal, start with a clean shaft and housing, free of burrs and scratches. Lubricate the lip, then press the seal in squarely with the right tool. Do not hammer on the lip. Your choice of seal also depends on shaft speed, operating temperature, and the lubricant in use. If the original seal has a different design, contact us to review a compatible alternative with the same dimensions.

To request a quote, send the code 5385Pol or the dimensions 85 x 105 x 13 mm by WhatsApp or email. Include the equipment type, lubricant, and working conditions if you can. We can suggest equivalents and help you choose the right seal for your application.