DBH 5382Sil radial shaft seal — 76 x 105 x 12
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5382Sil belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5382Sil and any equivalents.
The DBH 5382Sil is a radial shaft seal that keeps lubricant in and contaminants out of rotating equipment. It measures 76 mm at the shaft, 105 mm at the housing bore and 12.00 mm in height, and it uses the Lz design. MR Industrial Accessories supplies this brand and can help you confirm the right seal for your application.
This seal belongs to the DBH line and carries the code 5382Sil. Its dimensions are shaft 76 mm, housing bore 105 mm and height 12.00 mm. The Lz design means the seal has a sealing lip plus an external dust lip, which suits locations with moderate dust or dirt. The 5382Sil code is the reference you can use to identify it quickly.
You will find this size in gearboxes, centrifugal pumps, electric motors, conveyor rollers and power transmission equipment. In each case the seal does two jobs: it holds oil or grease inside and blocks outside particles that would wear bearings and shafts. Because of its dimensions, it is common on medium and large machines that run continuously.
Proper installation matters. Check shaft hardness and roughness, and make sure the housing is clean and free of burrs. The Lz design relies on slight interference between the lip and the shaft, so avoid damaging the lip when you press the seal in. Apply force on the outer ring only, using a press or an installation tool, never on the lip. For high peripheral speeds, review the lip material and the lubricant compatibility.
If you need an equivalent, send the code 5382Sil or the current dimensions: shaft diameter, housing bore and height. With that information we can look for alternatives in other brands or series that do the same job. We can also advise on lip type, material and design based on the fluid being retained and your operating conditions.
To request a quote, message us on WhatsApp or email with the code 5382Sil. We reply promptly with the technical details you need to keep your equipment running without leaks.
Dimensions
- Shaft (d)
- 76mm
- Housing bore (D)
- 105mm
- Height (h)
- 12.00mm
- Design
- Lz
Frequently asked questions
- What are the dimensions of the DBH 5382Sil seal?
- The DBH 5382Sil seal has a 76 mm shaft diameter, a 105 mm housing bore and a 12.00 mm height. These match the standard designation for that radial seal size.
- What applications is this seal suitable for?
- It is used in gearboxes, pumps, electric motors and other rotating shaft equipment where lubricant must be retained and contaminants excluded. The Lz design with an external dust lip makes it suitable for environments with moderate dust or dirt.
- How do I request a quote or an equivalent?
- Send us the code 5382Sil or the dimensions of your current seal via WhatsApp or email. We will quote it and, if needed, suggest an equivalent alternative that fits your equipment.