DBH 5323Vit radial shaft seal — 22 x 32 x 7.8
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5323Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5323Vit and any equivalents.
The DBH 5323Vit is a radial shaft seal designed to keep lubricant in and contaminants out of assemblies with a rotating shaft. It fits a 22 mm shaft, a 32 mm housing bore and a 7.80 mm height, dimensions common in gearboxes, pumps, electric motors and light-duty transmissions. MR Industrial Accessories supplies this brand and helps you match the right seal to your equipment.
This seal belongs to the DBH line and carries the reference 5323Vit. In the code, the first numbers reflect the shaft and housing sizes, while the Vit suffix identifies the lip compound, which stands up to elevated temperatures and synthetic oils. The Lx design means a single sealing lip with a metal case, a configuration intended for rotating shafts under permanent lubrication.
You will find this size in gearboxes, centrifugal pumps, low-power electric motors, fan shafts and belt drives. Its job is to hold the lubricant inside the assembly and block dust, water and other external matter. Because it is a wear part, it is worth inspecting whenever oil appears around the shaft or the nearby bearing starts making unusual noise.
Before fitting, confirm the shaft is 22 mm and the housing bore is 32 mm, free of burrs or scratches. Apply lubricant to the lip, then seat the seal with a press or a suitable driver that pushes evenly on the outer ring. The 7.80 mm height should end up flush or slightly recessed, depending on the housing. Keep the lip free of impacts and check that the internal spring faces the lubricant side.
If you are looking for an equivalent, send the code 5323Vit or the three dimensions of the seal you are replacing: shaft, housing and height. A photo of the part and the housing also helps. We compare what you send against the options we carry and come back with a compatible choice.
To request a quote for the DBH 5323Vit seal, message us on WhatsApp with the code or the dimensions. Our team replies promptly and can suggest equivalents or help you select the right seal for your application.
Dimensions
- Shaft (d)
- 22mm
- Housing bore (D)
- 32mm
- Height (h)
- 7.80mm
- Design
- Lx
Frequently asked questions
- What does the Lx design mean on this seal?
- It indicates a radial shaft seal with one sealing lip and a metal case, made for rotating shafts with continuous lubrication. This is a common choice when axial space is tight and a reliable barrier against leaks and contaminants is needed.
- How do I know if the 5323Vit seal is compatible with my equipment?
- Check the shaft at 22 mm, the housing at 32 mm and the height at 7.80 mm. If those match, the seal fits. If you are unsure, send us the dimensions or a photo of the old part on WhatsApp and we will confirm the equivalent among the options we carry.
- What care should I take when installing a radial shaft seal?
- Clean the shaft and housing, lubricate the lip and press the seal in with a tool that rests on the outer ring. Avoid impacts and make sure the spring faces the lubricant side. Careful installation helps the seal and the bearing last longer.