DBH 5307Sil radial shaft seal — 48 x 62 x 9

DBH 5307Sil belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5307Sil and any equivalents.

The DBH 5307Sil is a radial shaft seal built to hold lubricant inside a housing and keep dust, water and other contaminants out. It runs with the lip against a rotating shaft, so the fit between seal, shaft and bore decides how well it performs. The Lx design is a single lip with a spring, and the dimensions are 48 mm at the shaft, 62 mm at the housing and 9.00 mm in height. MR Industrial Accessories supplies this brand and helps buyers confirm the right seal for the job.

Reading the designation is the fastest way to confirm a match. The code 5307Sil identifies the item, while the three figures that follow give the bore it presses into, the shaft it rides on and its width: housing 62 mm, shaft 48 mm, height 9.00 mm. The Lx callout tells you the lip layout is a single element with a spring, a common choice for retaining oil or grease on a turning shaft. Because the seal sits in contact with two surfaces at once, the dimensions and the service conditions both matter when selecting a replacement.

You will find seals of this size in gearboxes, pumps, electric motors, rollers and other power transmission equipment, where the goal is to keep lubricant where it belongs and protect bearings from the surrounding environment. Agricultural machinery, process lines and hydraulic systems running 48 mm shafts are also typical. As a medium-section seal, it suits equipment that runs continuously, where a failed seal means unplanned downtime.

Installation goes more smoothly when you check the shaft and bore against the stated values first. The shaft should be free of burrs, with a finish and hardness that the lip can run against without premature wear. Coat the lip with lubricant before pressing it in, and use a driver that seats the seal squarely without nicking the lip. For high peripheral speeds or elevated temperatures, ask us about lip material and spring options before you commit.

If you need a cross-reference, note the shaft, housing and height of the original seal and send them over. We can search within the DBH line or look at other options that meet the same dimensions. We can also help you choose the lip design and material based on the fluid being retained and how the equipment operates. The more detail you provide, the closer the first proposal will be.

To get a quote, send the code 5307Sil by WhatsApp or email. If you are unsure about an equivalent or want the application checked, our team will come back with the information you need. We cover industrial sealing requirements across a range of brands.