DBH 5282Vit radial shaft seal

DBH 5282Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5282Vit and any equivalents.

The DBH 5282Vit is a radial shaft seal from the DBH line that MR supplies for rotating equipment. It is built to keep lubricant in and contaminants out. With a 70 mm shaft size and a 90 mm housing size, it fits many industrial assemblies. The Lx design refers to a single sealing lip with a metal case, intended for shafts that run with permanent lubrication.

The seal is listed with a shaft diameter of 70 mm, a housing diameter of 90 mm and an Lx design. Its nominal height appears as 0 mm, so that value should be checked against the manufacturer's data sheet before you set the mounting. The Lx configuration is a common choice for moderate peripheral speeds and low pressures.

You will find this oil seal in gearboxes, centrifugal pumps, electric motors, conveyor rollers and other power transmission equipment. In each case, it protects bearings and gears from dust, water and chips while holding oil or grease inside the assembly. As a preventive maintenance item, replacing it on schedule helps avoid larger failures and keeps rotating components running.

When selecting a replacement, match the shaft and housing dimensions to your equipment. Always verify the total height as well, since the 0 mm figure may be incomplete. During installation, lubricate the lip with the same oil used in the machine, avoid impacts on the metal case, and make sure the shaft is free of burrs or excessive wear.

To request a quote, send the part number 5282Vit or the exact dimensions of your equipment by WhatsApp or email. The MR team replies promptly and can suggest equivalents and help you choose the right seal. MR also manufactures split plummer block housings, roller chains and sheaves, and supplies bearings, mounted units, power transmission parts, seals, lubrication and maintenance tools.