DBH 5094Sil radial shaft seal — 48 x 68 x 14

DBH 5094Sil belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5094Sil and any equivalents.

A lip seal such as the DBH 5094Sil sits in the housing bore and rides against the rotating shaft, keeping lubricant in and contaminants out. Its dimensions are 48.00 mm for the shaft, 68.00 mm for the housing and 14.00 mm for the height, and it follows the Lx design. Sizes like this show up often in pumps, gearboxes and transmission equipment, which is why it is part of the seals and oil seals line MR Industrial Accessories supplies.

The seal is ordered by its 5094Sil designation, and the three figures to check before anything else are shaft 48.00 mm, housing 68.00 mm and height 14.00 mm. The Lx design means a single sealing lip with a metal case, made for lubricated rotating shafts. As a brand carried in our line, the DBH product reaches you with its original identification and traceability.

You will find a seal of this size in gearboxes and reducers, centrifugal pumps, electric motors and other power transmission equipment. Its job in each of them is the same: hold the oil or grease inside the assembly and keep dust, water and particles from working their way in. Fan, mixer and conveyor shafts also use it, where it shields the bearings and helps the equipment stay in service longer.

Before pressing one in, confirm the shaft and housing are clean and free of burrs or scratches, and that the shaft surface meets the hardness and roughness a radial shaft seal needs. Apply lubricant to the lip, then seat the seal square to the shaft with a press or a support tube that will not distort the case. Where vibration or temperature runs high, a spring-loaded version or a different material may be the better choice.

Send us code 5094Sil or the figures 48 x 68 x 14 mm and we will confirm alternatives within the same series or from other brands we carry. If the shaft or housing shows wear, we can also tell you whether a repair size makes more sense. The aim is a seal that matches your equipment without back-and-forth.

For a quote on the DBH 5094Sil seal, or to ask about other sizes in the seals line, reach the MR Industrial Accessories team on WhatsApp or by email with the code or the dimensions. We reply promptly with the technical information you need to keep your maintenance moving.