DBH 5080 radial shaft seal — 62 x 100 x 12

DBH 5080 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5080 and any equivalents.

The DBH 5080 is a radial shaft lip seal that keeps lubricant in and contaminants out of rotating equipment. It fits a 62 mm shaft, a 100 mm housing bore and has a 12 mm height, and its Lx design indicates a single lip with a spring for lubricated service. You will find this seal in gearboxes, pumps, motors and other power transmission assemblies. MR Industrial Accessories supplies the DBH line and can help you match the right seal to your application.

The designation 5080 tells you the size: d = 62 mm for the shaft, D = 100 mm for the housing and h = 12.00 mm for the width. The Lx suffix points to a single-lip seal with a garter spring, which is the usual choice for rotating shafts that run with oil or grease. DBH is one of the brands we carry, so you can ask for the current data sheet and batch information.

Seals of this size show up in gearboxes, centrifugal pumps, electric motors, compressors and similar power transmission equipment. Their job is to hold oil or grease inside and to keep dust, water and particles away from bearings and gears. Because it is a wear part, check it during every preventive maintenance stop, particularly if you notice leaks or unusual noise in the assembly.

Before installing, confirm the shaft has the correct hardness and surface finish, with no burrs or scratches that could cut the lip. Apply a little of the same oil or grease to the lip, then press the seal in with a tool that pushes on the outer ring only, never on the lip. The housing bore must be clean and undistorted. If the shaft is worn, look at a repair sleeve or a different size.

If you need a replacement or an equivalent, send the complete part number, the shaft, housing and height measurements, and a photo of the old seal if you have one. With that information we can check the DBH range and other options we supply. We can also guide you on lip style, material and spring based on the speed, temperature and fluid in your equipment. Do not guess dimensions: a seal that is the wrong size fails early and can damage the shaft.

To request a quote for the DBH 5080, message us on WhatsApp at MR Industrial Accessories with the part number 5080 and the dimensions. We will come back with the technical details and help you place your order.